Sanyo PLV 80 Owners Manual - Page 41
Remote control, Security, To change the code for the projector, Key lock
UPC - 086483059254
View all Sanyo PLV 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
SETTING Remote control This projector provides eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. For example operating the projector in "Code 7", both the projector and the remote control must be switched to "Code 7". To change the code for the projector; Select a remote control code in this Setting Menu. To change the code for the remote control; Check the Reset Switch to "Use position" in the compartment lid on back of the remote control. And then while holding down the MENU button, press the IMAGE button number of times corresponding to the remote control code for the projector. To reset the code for the remote control; Slide the Reset Switch to "Reset position" in the compartment lid on back of the remote control. Remote control When pressing the SELECT button at Remote control, the remote control code menu appears. Use position Reset position Security Key lock This function locks operation of the top control and remote control. It is useful to prevent operation by an unauthorized person. ···· not locked. ···· locks operation of the top control. To unlock, use the remote control. ···· locks operation of the remote control. To unlock, use the top control. If the top control accidentally becomes locked and you do not have the remote control nearby, disconnect the AC power cord from the AC outlet, and then with pressing the SELECT button, reinsert the AC power cord. This will cancel the top control lock. Reset switch Security Key lock Select Key lock and this box appears. Choose one of these with the POINT UP/DOWN buttons and select [Yes] to activate it. 41