Sanyo PLV 80 Owners Manual - Page 54
yellow, green, The lamp cannot light up. The projector is preparing for stand
UPC - 086483059254
View all Sanyo PLV 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
APPENDIX Indicators LAMP WARNING REPLACE TEMP. yellow red READY green ✽ Projector Condition LAMP red The projector is being cooled down. It cannot be turned on until the READY indicator lights green. The projector detects an abnormal condition and cannot be turned on. Unplug the AC Power Cord and plug it again to turn on the projector. If the projector is turned off again, disconnect the AC Power Cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. ✽ The projector is in the Power management mode. ✽ ✽ ✽ The temperature inside the projector is abnormally high. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the READY indicator lights green and the projector can be turned on. The lamp cannot light up. (The projector is preparing for standby or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.) The lamp cannot light up. (The lamp has been cooled down enough and the projector is in stand-by mode and ready to be turned on with the POWER ON-OFF button.) The life of the projection lamp draws to an end. Replace the lamp and then reset the Lamp time. The indicator will turn off. • • • on • • • flashing • • • dim • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp. 54