Sanyo Slim-1400 User Guide - Page 14

3. When desired track number is displayed, press MEM / PGM button to register. Track number " 00 "indicator flashes on display again. 4. Repeat steps (2) & (3) above until all desired (or up to 20) tracks had been entered. 5. Press PLAY/PAUSE ( II ) button. " PGM "indicator stops flashing and CD starts program playback. NOTE : If you press the 44 and 1,4i buttons during programmed playback, the unit will skip forward to the next track in the program, not necessary the next track on the disc. a) PGM repeat 1 track: During PGM playback, press PLAY MODE button once. Unit will repeatedly playback current PGM track, " PGM " & " C 1') " indicators displayed. b) Repeat playback ALL programmed track(s): During PGM playback, press PLAY MODE button twice. Unit will repeatedly playback allprogrammed tracks, "PGM " & " (ALL fr indicators displayed. c) Playback INTRO ofprogrammed track(s) : During PGM playback, press PLAY MODE button 3 times, " INTRO " indicator flashes. Press PLAY/PAUSE ( ► I I ) button playback the 1st 10 seconds of each programmed track, " PGM " & " INTRO " indicators displayed. To cancel Playback / all Repeat modes at any time simply press the STOP ( E ) buttoon. CLOCK SETTI NG SETTING TIME 1. Press MODE button 3 time, the display will flash. 2. Press button 44 or to set advance or reverse the hour. 3. Press button VOL- or VOL+ to set advance or reverse the minute. 1. Press MODE button again to enter 12/24 hour format setting. 5. Use 44 to select 12 or 24 hour format. 3. Press MEM / PGM button to save entries or just wait for around 15 seconds to exit setting mode. 13