Sanyo VCC-HD4000 Instruction Manual, VCC-HD4000P Installation - Page 30
Main specifications - hdmi
UPC - 086483072505
View all Sanyo VCC-HD4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Main specifications Television system Lens Image pickup device Effective pixels Recording pixels Lens Camera Video size (H.264) Video size (JPEG) Synchronization method Lowest image illumination Recording Picture quality and Recording rate playback Recording mode I/O Video output Network Others Image/video compression Picture quality Bandwidth Interface Protocol Simultaneous access Security Operating ambient temperature/humidity Power source Power consumption Weight VCC-HD4000P/VCC-HDN4000PC: PAL color standards VCC-HD4000: NTSC color standards 1/2.5" CMOS sensor 2,320 (H) × 1,728 (V), approx. 4.00 million pixels 2,288 (H) × 1,712 (V), approx. 3.92 million pixels Focal length: f = 6.3 - 63.0 mm (Optical 10×) F-number: F1.8 - 2.5 Electronic zoom: Max. ×16 (max. ×160 when combined with optical zoom) VCC-HD4000P/VCC-HDN4000PC: (16:9) HD 1920×1080p, HD 1280×720p, 960×540p, 640×360p, 320×180p (4:3) 1080×864p, 720×576p, 360×288p VCC-HD4000: (16:9) HD 1920×1080p, HD 1280×720p, 960×540p, 640×360p, 320×180p (4:3) 1080×720p, 720×480p, 360×240p (16:9) HD 1920×1080, HD 1280×720, 1024×576, 640×360 (4:3) 4M 2288×1712, 4M 1600×1200, 1280×960, 1024×768, 800×600, 640×480, 320×240 Internal synchronization 2.0 lx (at F1.8, color, high gain, VGA) 0.1 lx (at F1.8, black-and-white, high gain, VGA) BASIC, NORMAL, ENHANCED, FINE, SUPER FINE JPEG/H.264 selectable NORMAL/ALARM RECORDING: Timer recording REC BUTTON RECORDING: Emergency recording Backup recording in the event of a network recording failure: NORMAL (at failure detection), ALARM (timer recording) HD output: HDMI connector SD output: BNC connector LAN: 10BASE-T/100BASE-TX/1000BASE-TX (RJ-45 connector) USB port: External hard disk case (2.5" HDD) supported SD card slot: 1 (SDHC, max. 32 GB) Alarm input: Control terminal 1/2 (NO (Normally Open) or NC (Normally Closed)), also used for day/night switching input Alarm output: Control terminal (NO/NC switching, 16V, 150mA, open collector) External lens control: Zoom, Focus, Common (Voltage control: ±6 to ±12V) Operation buttons: MENU, SET, RESET, cursor buttons (4) H.264/JPEG BASIC, NORMAL, ENHANCED, FINE, SUPER FINE NO LIMIT or selectable 10BASE-T/100BASE-TX/1000BASE-TX (PoE) TCP/IP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP, DDNS 16 BASIC authentication (ID/password), SSL supported -10 to +50°C, 90% RH or less (no condensation) DC12V-15V AC24V ±10%, 50/60Hz 12.3 W 710 g Appearance and specifications are subject to change without prior notice or obligations. 29