Sanyo VCC-ZM600N Installation Manual - Page 8

Features & You can perform the settings on the camera by navigating through the menu screens. Zooming Function b You can store the zoom and focus settings of surveillance locations by camera setting number. & [CAMERA] ⇒ [POSITION] CAMERA 1 CAMERA 2 POSITION POSITION x 1.0 SET y x 3.0 SET y b The electronic zooming function can be used to zoom in the object at the magnification power higher than that in the optical zoom. & [LENS] ⇒ [ZOOM] ⇒ [EL ZOOM] b You can change the zooming speed. & [LENS] ⇒ [ZOOM] ⇒ [SPEED] Remote Operations b The camera can be controlled remotely by establishing the RS-485 or coaxial super imposed communication. & [OPTION] ⇒ [SYSTEM] b You can switch the viewing mode manually between the color mode and the black/white mode. & [CAMERA] ⇒ [COLOR] ⇒ [EXT ALARM] Camera Title You can set and display the camera title. This helps you confirm from which camera the image is sent when multiple cameras are connected. (Maximum 16 characters) & [OPTION] ⇒ [DISPLAY] ⇒ [TITLE] ROOM1 ROOM2 ROOM1 ROOM2 Alarm Settings b The camera has a built-in motion sensor. & [CAMERA] ⇒ [MOTION] ⇒ [ON] Not detected Detected b The alarm condition can be detected by connecting door switches or infrared sensors. & [ALARM] ⇒ [ALARM IN] Alarm Notice b The camera title you specified in the [OPTION] menu blinks to notify that the alarm condition is detected. & [ALARM] ⇒ [ALARM DISPLAY] DOOR1 b When the alarm condition is detected, the object on the screen is zoomed in. & [ALARM] ⇒ [ALARM IN] ⇒ [ACTION] ⇒ [ZOOM] b A buzzer or lamp can be used to notify you of detection of alarm when you are in a distant place from the monitor. & [ALARM] ⇒ [ALARM OUT] 7