Sanyo VDC-HD3300 VDC-HD3300 Manual - Page 12
Introduction 12/15 - megapixel camera
UPC - 086483075087
View all Sanyo VDC-HD3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
After installing the lens to the camera, you need to perform the following adjustments for the lens. A Angle of View/Focus Adjustment (FOCUS ASSIST) B Iris Adjustment (IRIS) Using network operation, you can use the focus assist function to adjust the focus. Use the focus assist function to accurately focus on subject in high-resolution megapixel image because otherwise doing so would be extremely difficult. When focus cannot be adjusted normally because the video images are too dark or too bright, adjust the lens iris first ( B ). The focus must be readjusted if the camera has lost focus due to difference in the subject distance or ambient temperature, the deterioration of the lens and installation environment, and the like that have been caused over the years. 1 Press the SET button for 2 seconds or more. The monitor now shows the SELECT MENU screen. On the SELECT MENU screen, all information is displayed in English. 2 Select [FOCUS ASSIST] using the NEAR/FAR button and press the SET button. The monitor now shows the focus adjustment screen. Introduction 12/15