Sanyo VDC-HD3300 VDC-HD3300 Manual - Page 87
Working with Administrator Configuration Screens 39/50
UPC - 086483075087
View all Sanyo VDC-HD3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Click E-MAIL in the configuration menu to display the E-MAIL SETTINGS screen. Using the automatic e-mail transmission function, you can send an e-mail attached with an image if an alarm is detected, or after a fixed interval. A Configuring basic e-mail transmission settings B Configuring recipient e-mail addresses (RECIPIENT MAIL ADDRESS) C Configuring authentication conditions (AUTHENTICATION) D Configuring transmission conditions E Configuring e-mail text (SUBJECT/TEXT) Log information display area (LOG): In [LOG], you can view the SMTP (e-mail) transmission log. Required operation privilege: admin, operator For network-related settings, consult your network administrator. 1 In [E-MAIL], select "ON" to enable the e-mail transmission function. 2 In [SSL], select "ON" to use SSL communication. If your e-mail server supports SSL, you can encrypt e-mail transmission. 3 Configure your e-mail server. Type the following information on your e-mail server. A SMTP SERVER ADDRESS Type the address of your SMTP server (up to 64 alphanumeric characters). B SMTP PORT NUMBER Type the incoming port number of your SMTP server. The available port numbers are 0 to 65535. Normally, use the default value "25". However, if you are using the submission port for security reasons or in other cases where you need to do so, change the default value. 4 In [USER MAIL ADDRESS], type the sender's e-mail address and click SET . Here, you can type only one e-mail address (up to 64 alphanumeric characters). Working with Administrator Configuration Screens 39/50