Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 30
Confirming the operation
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 4 Wired LAN configurations Confirming the operation Confirm that the projector has connected to the LAN properly. 1. Activate "Network Capture 5" which is installed into the computer connected to the LAN . 2. After "Searching projector" message appears, the name of the projector* appears on the Network Projector List, then the network setting has completed properly. When the name of the projector does not appear and error screen appears, the network has not connected yet. Try searching again with the Search PJ button. If error screen appears again, reconfirm the LAN setting. When the projector is set in the location separated by the router, see next page. When Firewall function (Anti-virus software) is effective, network projector may not be found. In that case, disable the Firewall function and try searching again. ✳ If the projector is named, the name will be displayed. The name can be set with the following procedures in "6. Basic setting and operation" ➔ "Initial setting" (p.50) . If the projector is not named, IP address of the projector will be displayed. Network Capture screen Network Projector List Search PJ button 30