Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 55
Configuring wireless LAN setting and security setting, Notes for entering characters
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Configuring wireless LAN setting and security setting Configuring wireless LAN setting and security setting Configure the wireless LAN setting and security setting for Wireless 4 and Wireless 5. Configuring wireless LAN setting 1. Click page [2] of setting pages. Following wireless LAN setting can be done. After completing the configuration, press Set button. Item Description Wireless Mode.........Select the Communication standard 802.11b or 802.11b/g/n Network Type..........Select either "Infrastructure" or "AdHoc". When selecting the "AdHoc", the security "WPA-PSK" and "WPA2-PSK" mode are not available. SSID/ESSID Set the SSID/ESSID. (up to ASCII 32 characters) SSID/ESSID is case-sensitive. Even though all characters on the Wireless information is uppercase, it is necessary to distinguish between upper case and lower case characters. Channel If you use the projector in 802.11AdHoc mode, select the channel, from 1 to 11. Notes for entering characters: The "¥" symbol is displayed as "\" when the ASCII key is used. The "]" symbol is treated as a character by the ASCII key, but it is not interpreted as a character by the HEX key. In HEX, the "]" symbol is displayed in red and setting is denied. You can not set all the characters with the "]" symbol. It will be considered as no operation. ASCII key characters : Space - 0 to 9 A to Z a to z HEX key characters : 0 to 9 a to f 55