Sanyo XL51 Instruction Manual, PLC-XL51 - Page 46

Setting Uniformity adj. This function adjusts the brightness uniformity on a screen. Select either Store 1, Store 2 or Reset with the Point 7 8 buttons, and then press the SELECT button. Press the Point 7 8 buttons to adjust the brightness uniformity (from 0 to 7). Store 1......S tore the uniformity adjustment even when the projector is turned off. Reset the uniformity adjustment when the AC power cord is unplugged. Store 2......S tore the uniformity adjustment even when the projector is turned off or the AC power cord is unplugged. Reset........Reset the Uniformity adjustment when the projector is turned off or the AC power cord is unplugged. ✔Note: • Sometimes, the brightness uniformity can not be adjusted under certain conditions. With the adjustment of brightness uniformity, the balance of color or contrast also changes. Blue back Press the Point 7 8 buttons to switch on/off. When this function is "On," a blue image is displayed while the input signal is not detected. Display Press the Point 7 8 buttons to switch on/off. This function decides to display the On-Screen Displays. On Display all the On-Screen Displays. Use this function when you want to project images after the lamp becomes bright enough. This mode is set as a default. Countdown off...Display the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off D o not show the On-Screen Displays. except: ● On-Screen Menu ● "Power off?" ● P-Timer ● "No signal" for Power management item (p.50) ● "Please wait..." ● Arrows for panning mode (p.36) 46