Sanyo XL51 Instruction Manual, PLC-XL51 - Page 55
Factory default, Filter counter, Test pattern, Fig.4
UPC - 086483072222
View all Sanyo XL51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Setting Filter counter This function is used to set a frequency for the filter cleaning. When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset. For details about resetting the timer, refer to "Resetting the Filter Counter" on page 61. ✔Note: •A t selecting input source, the icon (Fig.4) will appear. •The Filter warning icon (Fig.3 and Fig.4) will not appear when the Display function is set to "Off" (p.46), during "Freeze" (p.25), or "No show" (p.26). Filter counter Use the Point 7 8 buttons to set the timer. Select from (Off/100H/ 200H/ 300H) depending on the use environment. Fig.3 Filter warning icon Filter warning icon (Fig.3) appears on the screen at a set time. ✔Note: •T he icon (Fig.3) appears at turning on. Fig.4 Filter warning icon Test pattern Various test patterns are available for use when setting up the projector. Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, the lamp counter, and the filter counter to the factory default settings. Factory default Select Factory default and this box appears. Select "Yes," and the next box appears. Quit Exit the Setting Menu. Select "Yes" to activate it. 55