Sanyo plc sw30 Owners Manual - Page 21

No Show Function Press NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as "User" in the Logo item in the Setting menu ( ☞ P36 ), the screen changes each time you press the NO SHOW button as follows : black out ➜ the captured image ➜ normal ➜...... P-Timer Function Press P-Timer button on the remote control. The timer display "00 : 00" appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59). To stop P-Timer display, press the P-TIMER button. And then, press P-TIMER button again to cancel P-Timer function. Basic Operation Message disappears after 4 seconds. Sound Adjustment Direct Operation Volume Press VOLUME (+/-) button on the remote control or on the top control to adjust volume. The volume dialog box appears on the screen for a few seconds. VOLUME (+) button to increase volume, and VOLUME (-) button for decreasing. Mute Press MUTE button on the remote control to cut off sound. To restore sound to its previous level, press MUTE button again or press Volume (+/-). Indicates approximate level of volume. Press MUTE button to set Mute function On or Off. The display disappears after 4 seconds. Menu Operation 1 Press MENU button to display the On-Screen Menu. Press Point 7 8 buttons to move the red frame pointer to SOUND Menu icon. 2 Press Point d button to move the red frame pointer to the item that you want to select, and then press SELECT button. Volume To increase volume, press Point 8 button, and press Point 7 button to decrease volume. SOUND MENU Sound Menu icon Indicates approximate level of volume. Close Sound Menu. Mute Press Point 7 8 buttons to mute sound. Dialog box display is changed to "On" and sound is muted. To restore sound to its previous level, press Point7 8 buttons again. 21