Sanyo plc sw30 Owners Manual - Page 30

Video Input Input Source Selection ( Video, S-Video ) Direct Operation Choose Video by pressing INPUT button on the top control or VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Video Computer Menu Operation 1 Press MENU button to display the On-Screen Menu. Press Point 7 8 buttons to move the red frame pointer to INPUT Menu icon. 2 Press Point d button to move the red arrow pointer to Video and then press SELECT button. Source Select Menu will appear. 3 Move the pointer to the source that you want to select and then press SELECT button. Auto When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1st S-VIDEO 2nd VIDEO The S-VIDEO has priority over the VIDEO Video S-Video When video input signal is connected to VIDEO jack, select Video. When video input signal is connected to S-VIDEO jack, select S-Video. INPUT MENU VIDEO Move the red arrow pointer to Video and press SELECT button. Source Select Menu (VIDEO) Move the pointer to the source and press SELECT button. 30