Schwinn 411 Elliptical Service Manual - Page 21
Owner's Manual.
View all Schwinn 411 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
12. Remove the cardboard and tape from the Brake Assembly and Flywheel. Verify that the Brake Magnet Arm can move freely and that the Brake Magnet and Flywheel do not touch. 13. Before fully attaching the Shrouds, power up the machine to verify that the Magnet Arm can move freely, and that the Brake Magnet and Flywheel do not touch at the maximum resistance level. ! Machine is on. Current is active. There is risk of electrical shock. Be sure to keep fingers clear of all pinch hazards when you change the resistance level. 14. Unplug the AC Adapter from the wall outlet and machine. 15. Re-assemble the machine in the reverse order of when the parts were removed. 16. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. Brake Magnet Arm Flywheel 21