Schwinn 411 Elliptical Service Manual - Page 52
Inlet Assembly on the Left Upper Engine Shroud.
View all Schwinn 411 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
4. Using a #2 Phillips screwdriver, remove the indicated screws (by ovals) from the Left Upper Engine Shroud. Note: T he Power Inlet is attached to the inside of the Left Upper Engine Shroud. Do not crimp the Power Inlet Cable. Left Upper Engine Shroud Power Inlet 5. Using a 14mm wrench, loosen and remove the thin Nut from the Power Inlet Assembly on the Left Upper Engine Shroud. Note: Do not crimp the Cable. 6. Remove the old Power Inlet Assembly, and replace with the new Power Inlet Assembly. Note: Do not crimp the Cables. 7. Re-assemble the machine in the reverse order of when the parts were removed. 8. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. Power Inlet 52