Schwinn 411 Elliptical Service Manual - Page 43
Remove the Pivot Shroud from the Frame Assembly.
View all Schwinn 411 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
1. Unplug the AC Adapter from the wall outlet and machine. 2. Using two 6mm hex wrenches, remove the hardware that connects the Pedal Arms to the Lower Handlebars (indicated by arrow for the right side). Be aware that the Handlebar Assembly will be loose and will pivot when the hardware is removed. Safely allow the Handlebar Assembly to pivot downward and come to rest. Be sure not to be in the path of the Handlebar Assembly. 3. Remove the Pivot Shroud from the Frame Assembly. Pivot Shroud 4. Using a #2 Phillips screwdriver, remove the two screws that secure the Handlebar Shrouds. 5. Remove the Handlebar Shrouds from the Frame Assembly. Handlebar Shrouds 43
43
1. Unplug the AC Adapter from the wall outlet and machine.
2. Using two 6mm hex wrenches, remove the hardware that connects
the Pedal Arms to the Lower Handlebars (indicated by arrow for the right
side).
Be aware that the Handlebar Assembly will be loose and will
pivot when the hardware is removed. Safely allow the Handle-
bar Assembly to pivot downward and come to rest. Be sure
not to be in the path of the Handlebar Assembly.
3. Remove the Pivot Shroud from the Frame Assembly.
4. Using a #2 Phillips screwdriver, remove the two screws that secure the
Handlebar Shrouds.
5. Remove the Handlebar Shrouds from the Frame Assembly.
Pivot Shroud
Handlebar
Shrouds