Schwinn 420 Elliptical Owners Manual - Page 19
Maintenance - repair
View all Schwinn 420 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Maintenance The safety and performance of this product can be maintained only when examined regularly for damage and wear. Disconnect power supply before servicing or performing maintenance on the Elliptical Trainer. Examine the Elliptical Trainer regularly for damage and wear. Replace broken components immediately or put the equipment out of use until repaired. Daily/Before Each Use: Examine machine. Make sure it looks in good condition and operates smoothly. If you find damage, DO NOT USE. Contact your authorized Schwinn® Fitness Dealer for servicing. Daily/After Each Use: Clean machine with a clean, dry cloth. Use a damp cloth to clean your Elliptical Trainer and Console. Use a mild detergent or spray cleaner on upholstery. Do not use cleansers containing enzymes. Weekly: Examine the machine for smooth rear roller operation. Clean all surfaces. Monthly: Examine all bolts and screws. Tighten as necessary. IMPORTANT: Do not use a petroleum-based solvent when cleaning. It causes damage to the finish on the Elliptical Trainer and Console. Avoid getting unwanted moisture on the Console. If you have any questions on the correct use or maintenance of this equipment, call your authorized distributor or Nautilus Customer Service at 1-800-NAUTILUS (628-8458). Only Nautilus-trained or Nautilus-authorized personnel should make extensions, readjustments, modifications, or repairs. Leveling the Elliptical Trainer You can level the machine to adjust for uneven surfaces. To make the machine level, turn the two leveling bolts located on the bottom of the rear stabilizer to lift or lower the machine until it is level with the surface. Moving the Elliptical Trainer Carefully, but firmly lift the rear end of the Elliptical Trainer. Slowly steer the Elliptical Trainer to the new location. Be careful while moving the unit. A sharp, direct or indirect, hit to the machine can affect computer operation. 19 Owner's Manual