Schwinn 840 Treadmill Assembly and Owner's Manual - Page 39
Troubleshooting
View all Schwinn 840 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4. Carefully tilt the base frame of the folded treadmill a small distance back on the transport wheels. Do not use the Console or handlebars to lift or move the treadmill. Damage to the treadmill can occur. Keep clear of the movement path of the lifted walking deck. 5. Roll the machine on the transport wheels to its new location. NOTICE: Move the machine carefully so that it does not hit other objects. This can damage the Console operation. 6. Prior to use, refer to the "Unfolding the Treadmill" procedure in this manual. Condition/Problem Unit does not power up/turn on/start Speed display is not accurate Unit operates but Contact HR not displayed or E4 error occurs Troubleshooting Things to Check Outlet Power cord not plugged in Power switch turned off Safety key not plugged in Display set to wrong unit of measure. (English/Metric) Safety key Solution Make sure AC outlet functions correctly. To verify this, plugging another object (ex: lamp) into the outlet. If outlet is connected to a light switch, check to make sure it is on. If outlet is not functioning find a working outlet. Make sure the power cord is firmly plugged into a non-GFI wall socket. Make sure the power switch at the front of the unit is in the "ON" position. Plug Safety Key into Console. (See Emergency Stop Procedure in the Important Safety Instructions section of this manual.) Change display to show correct units. Remove Safety Key. Plug Safety Key into Console. 39