Schwinn Airdyne AD7 Assembly and Owner s Manual - Page 14

Install Batteries in Console, Final Inspection

Get Schwinn Airdyne AD7 PDF manuals and user guides View all Schwinn Airdyne AD7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

7. Install Batteries in Console Note: To open the battery bay, loosen the preinstalled screw in the cover. The console uses D size batteries (LR20). Make sure that the batteries point in the direction of the +/- indicators in the battery bay. If you use rechargeable batteries, the optional power adapter will not recharge the batteries. ! Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries. X2 + - Optional Power Adapter The console for your machine can operate on battery power or AC power. For AC power, it is necessary to order the optional Power Adapter. If batteries and the Power Adapter are installed, the console will use the Power Adapter to operate. Note: If you use rechargeable batteries, the optional Power Adapter will not recharge the batteries. After the machine is fully assembled, connect the Power Adapter to the console and the wall outlet. NOTICE: If you use a power adapter for your machine, make sure that the cord stays clear of the path of the pedals. NOTICE: It is recommended to remove batteries when they are not used, to avoid damage from battery corrosion. To order the optional Power Adapter, go to: www.SchwinnFitness.com/powersupply Or call 1 (800) 605-3369. 8. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Be sure to record the serial number in the field provided at the front of this manual. Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
14
7. Install Batteries in Console
Note:
To open the battery bay, loosen the preinstalled screw in the cover. The console uses D size batteries (LR20). Make
sure that the batteries point in the direction of the +/– indicators in the battery bay. If you use rechargeable batteries,
the optional power adapter will not recharge the batteries.
!
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.
Optional Power Adapter
The console for your machine can operate on battery power or
AC power. For AC power, it is necessary to order the optional
Power Adapter. If batteries and the Power Adapter are installed,
the console will use the Power Adapter to operate.
Note:
If you use rechargeable batteries, the optional Power
Adapter will not recharge the batteries.
After the machine is fully assembled, connect the Power
Adapter to the console and the wall outlet.
NOTICE:
If you use a power adapter for your machine, make
sure that the cord stays clear of the path of the
pedals.
NOTICE:
It is recommended to remove batteries when they are
not used, to avoid damage from battery corrosion.
To order the optional Power Adapter, go to:
www.SchwinnFitness.com/powersupply
Or call 1 (800) 605–3369.
8. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Be sure to record the serial number in the field provided at the front of this manual.
Do not use or put the machine into service until the machine has been fully assembled and inspected for
correct performance in accordance with the Owner’s Manual.
X2
+
–