Seagate Enterprise Capacity 3.5 HDD/Constellation ES Constellation ES (.1) SA - Page 10

Drive specification - hard drives

Page 10 highlights

Drive specification Relative humidity Relative humidity gradient Altitude, operating Altitude, nonoperating (below mean sea level, max) Operational Shock (max at 2 ms) Non-Operational Shock (max at 2 ms) Vibration, operating Operation Rotational vibration Vibration, nonoperating Drive acoustics, sound power (bels) Idle** Performance seek Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Load-unload cycles Supports Hotplug operation per Serial ATA Revision 2.6 specification ST2000NM0011 ST2000NM0031 ST2000NM0051 ST1000NM0011 ST1000NM0031 ST1000NM0051 5% to 90% (operating) 5% to 95% (nonoperating) 30% per hour max -60.96 m to 3,048 m (-200 ft to 10,000+ ft) -60.96 m to 12,192 m (-200 ft to 40,000+ ft) Read 70 Gs / Write 40 Gs 300 Gs 350 Gs 5-22 Hz: 0.25 Gs, Limited displacement 22-350 Hz: 0.50 Gs 350-500 Hz: 0.25 Gs 20-1500Hz: 12.5 rads/s² 10-500 Hz: 4.9 Grms ref ST500NM0011 ST500NM0031 ST500NM0051 2.7 (typical) 2.9 (max) 2.2 (typical) 2.5 (max) 1.9 (typical) 2.3 (max) 3.0 (typical) 3.3 (max) 1 sector per 1015 bits read 2.8 (typical) 3.1 (max) 2.7 (typical) 3.0 (max) 0.73% based on 8760 POH To determine the warranty for a specific drive, use a web browser to access the following web page: http://www.seagate.com/support/warranty-and-returns/ You will be asked to provide the drive serial number, model number (or part number) and country of purchase. After submitting this information, the system will display the warranty information for your drive. 300,000 (25°C, 50% rel. humidity) (600,000 design life testing) Yes * One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. * *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. 2.2 FORMATTED CAPACITY Model ST2000NM0011 ST2000NM0031 ST2000NM0051 ST1000NM0011 ST1000NM0031 ST1000NM0051 ST500NM0011 ST500NM0031 ST500NM0051 Formatted capacity* 2TB 1TB 500GB Guaranteed sectors 3,907,029,168 1,953,525,168 976,773,168 Bytes per sector 512 *One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. See Section 6.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit addressing support of drives with capacities over 137GB. CONSTELLATION ES SERIAL ATA PRODUCT MANUAL, REV. F 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

C
ONSTELLATION
ES S
ERIAL
ATA P
RODUCT
M
ANUAL
, R
EV
. F
5
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels
.
2.2
F
ORMATTED CAPACITY
Model
Formatted
capacity*
Guaranteed
sectors
Bytes per sector
ST2000NM0011
ST2000NM0031
ST2000NM0051
2TB
3,907,029,168
512
ST1000NM0011
ST1000NM0031
ST1000NM0051
1TB
1,953,525,168
ST500NM0011
ST500NM0031
ST500NM0051
500GB
976,773,168
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
2.2.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to
n–1,
where
n
is
the number of
guaranteed sectors as defined above
.
See Section 6.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit addressing support of
drives with capacities over 137GB.
Relative humidity
5% to 90% (operating)
5% to 95% (nonoperating)
Relative humidity gradient
30% per hour max
Altitude, operating
–60.96 m to 3,048 m
(–200 ft to 10,000+ ft)
Altitude, nonoperating
(below mean sea level, max)
–60.96 m to 12,192 m
(–200 ft to 40,000+ ft)
Operational Shock (max at 2 ms)
Read 70 Gs / Write 40 Gs
Non-Operational Shock (max at 2 ms)
300 Gs
350 Gs
Vibration, operating
5–22 Hz:
0.25 Gs, Limited displacement
22–350 Hz:
0.50 Gs
350–500 Hz: 0.25 Gs
Operation Rotational vibration
20–1500Hz: 12.5 rads/s²
Vibration, nonoperating
10–500 Hz:
4.9 Grms ref
Drive acoustics, sound power (bels)
Idle**
2.7 (typical)
2.9
(max)
2.2 (typical)
2.5
(max)
1.9 (typical)
2.3
(max)
Performance seek
3.0 (typical)
3.3
(max)
2.8 (typical)
3.1
(max)
2.7 (typical)
3.0
(max)
Nonrecoverable read errors
1 sector per 10
15
bits read
Annualized Failure Rate (AFR)
0.73% based on 8760 POH
Warranty
To determine the warranty for a specific drive, use a web browser to access the following
web page:
http://www
.seagate
.com/suppor
t/w
arr
anty-and-retur
ns/
You will be asked to provide the drive serial number, model number (or part number) and
country of purchase. After submitting this information, the system will display the warranty
information for your drive.
Load-unload cycles
300,000 (25°C, 50% rel. humidity) (600,000 design life testing)
Supports Hotplug operation per
Serial ATA Revision 2.6 specification
Yes
Drive specification
ST2000NM0011
ST2000NM0031
ST2000NM0051
ST1000NM0011
ST1000NM0031
ST1000NM0051
ST500NM0011
ST500NM0031
ST500NM0051