Seagate Enterprise Capacity 3.5 HDD/Constellation ES Constellation ES (.1) SA - Page 11
Default Logical Geometry Recording And Interface Technology Physical Characteristics Seek Time
View all Seagate Enterprise Capacity 3.5 HDD/Constellation ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2.3 DEFAULT LOGICAL GEOMETRY CYLINDERS 16,383 READ/WRITE HEADS SECTORS PER TRACK 16 63 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. 2.4 RECORDING AND INTERFACE TECHNOLOGY Interface Recording method Recording density, KBPI (Kb/in max) Track density, KTPI (ktracks/in avg) Areal density (Gb/in2 avg) Spindle speed (RPM) (± 0.2%) Internal data transfer rate (Mb/s max) Sustained data transfer rate (MB/s max) I/O data-transfer rate (MB/s max) Serial ATA (SATA) Perpendicular 1523 237 324 7200 1300 152 600 (Ultra DMA mode 5) 2.5 PHYSICAL CHARACTERISTICS Weight: (maximum) 2TB models 1TB models 500GB models Cache buffer 710g (1.565 lb) 640g (1.411 lb) 610g (1.345 lb) 64MB (64,768KB) 2.6 SEEK TIME Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: • Track-to-track seek time is an average of all possible single-track seeks in both directions. • Average seek time is a true statistical random average of at least 5000 measurements of seeks between random tracks, less overhead. Table 2: *Typical seek times (ms) Track-to-track Average Average latency: Read 0.5