Seagate Pipeline HD Pipeline HD Series SATA Product Manual - Page 12

Drive Specification, ST2000VM002, Pipeline HD SATA Product Manual, Rev. D - hard drive

Get Seagate Pipeline HD PDF manuals and user guides View all Seagate Pipeline HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Drive Specifications www.seagate.com Table 1 Drive specifications summary for 2TB,1.5TB, and 1TB models (Continued) Drive Specification Power-on to ready (max) Standby to ready (max) Track-to-track seek time (typical) Average seek (typical) Startup current (typical) 12V (peak) Voltage tolerance (including noise) Ambient temperature Temperature gradient (max) Relative humidity Relative humidity gradient (max) Wet bulb temperature (max) Altitude, operating Altitude, nonoperating (below mean sea level, max) Operational Shock (max) Non-Operational Shock (max) Vibration, operating Vibration, nonoperating Drive acoustics, sound power Idle** Seek Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Load/Unload cycles Supports Hotplug operation per the Serial ATA Revision 3.0 specification ST2000VM002 ST1500VM002

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
12
Pipeline HD SATA Product Manual, Rev. D
Drive Specifications
www.seagate.com
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power
to operational levels
Power-on to ready (max)
<17s
<17s
<6s
Standby to ready (max)
<17s
<17s
<6s
Track-to-track seek time (typical)
<1.0ms read;
<1.2ms write
<1.0ms read;
<1.2ms write
<1.0ms read;
<1.2ms write
Average seek (typical)
<12ms read;
<13ms write
<12ms read;
<13ms write
<8.5ms read;
<9ms write
Startup current (typical) 12V (peak)
2.0A
2.0A
2.0A
Voltage tolerance
(including noise)
5V: ± 5%
12V: ±10%
5V: ± 5%
12V: ±10%
5V: ± 5%
12V: ±10%
Ambient temperature
0° to 75°C (operating)
–40° to 70°C (nonoperating)
Temperature gradient (max)
20°C per hour (operating)
30°C per hour (nonoperating)
Relative humidity
5% to 95% (operating)
5% to 95% (nonoperating)
Relative humidity gradient (max)
30% per hour
30% per hour
30% per hour
Wet bulb temperature (max)
37.7°C (operating)
40.0°C (nonoperating)
Altitude, operating
–60.96m to 3048m
(–200 ft. to 10,000+ ft.)
–60.96m to 3048m
(–200ft. to 10,000+ ft.)
–60.96m to 3048m
(–200 to 10,000+ ft.)
Altitude, nonoperating
(below mean sea level, max)
–60.96m to 12,192m
(–200 ft. to 40,000+ ft.)
–60.96m to 12,192m
(–200 ft. to 40,000+ ft.)
–60.96m to 12,192m
(–200 ft. to 40,000+ ft.)
Operational Shock (max)
80 Gs at 2ms
80 Gs at 2ms
80 Gs at 2ms
Non-Operational Shock (max)
300 Gs at 2ms
300 Gs at 2ms
350 Gs at 2ms
Vibration, operating
2Hz–22Hz: 0.25 Gs,
Limited displacement
22Hz–350Hz: 0.50 Gs
350Hz–500Hz: 0.25 Gs
2Hz–22Hz: 0.25 Gs,
Limited displacement
22Hz–350Hz: 0.50 Gs
350Hz–500Hz: 0.25 Gs
2Hz–22Hz: 0.25 Gs,
Limited displacement
22Hz–350Hz: 0.50 Gs
350Hz–500Hz: 0.25 Gs
Vibration, nonoperating
5Hz–22Hz: 3.0 Gs
22Hz–350Hz: 3.0 Gs
350Hz–500Hz: 3.0 Gs
5Hz–22Hz: 3.0 Gs
22Hz–350Hz: 3.0 Gs
350Hz–500Hz: 3.0 Gs
5Hz–22Hz: 3.0 Gs
22Hz–350Hz: 3.0 Gs
350Hz–500Hz: 3.0 Gs
Drive acoustics, sound power
Idle**
2.0 bels (typical)
2.2 bels (max)
2.0 bels (typical)
2.2 bels (max)
1.9 bels (typical)
2.1 bels (max)
Seek
2.2 bels (typical)
2.4 bels (max)
2.2 bels (typical)
2.4 bels (max)
2.2 bels (typical)
2.3 bels (max)
Nonrecoverable read errors
1 per 10
14
bits read
1 per 10
14
bits read
1 per 10
14
bits read
Annualized Failure Rate (AFR)
0.55%
0.55%
0.55%
Warranty
To determine the warranty for a specific drive, use a web browser to access the
following web page:
support.seagate.com/customer/warranty_validation.jsp
From this page, click on the “Verify Your Warranty” link. You will be asked to provide
the drive serial number, model number (or part number) and country of purchase.
The system will display the warranty information for your drive Preventative
maintenance: none required.
Load/Unload cycles
300K at 25°C, 50% rel. humidity
Supports Hotplug operation per the
Serial ATA Revision 3.0 specification
Yes
Table 1
Drive specifications summary for 2TB,1.5TB, and 1TB models (Continued)
Drive Specification
ST2000VM002
ST1500VM002
ST1000VM002