Home » Seagate Manuals » Hard Drives » Seagate Pipeline HD » Manual Viewer

Seagate Pipeline HD Pipeline HD Series SATA Product Manual - Page 19

Vibration, 22Hz to 350Hz

View all Seagate Pipeline HD manuals

Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

www.seagate.com Drive Specifications The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs (for 2TB and 1.5TB models) and 350 Gs (for 1TB) based on a nonrepetitive half-sine shock pulse of 2ms duration. 2.9.6 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis, with linear swept sine inputs. 2.9.6.1 Operating vibration The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below. 2Hz to 22Hz 22Hz to 350Hz 350Hz to 500Hz 0.25 Gs (Limited displacement) 0.50 Gs 0.25 Gs 2.9.6.2 Nonoperating vibration The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 5Hz to 22Hz 22Hz to 350Hz 35Hz to 500Hz 3.0 Gs (limited displacement) 3.0 Gs 3.0 Gs Pipeline HD SATA Product Manual, Rev. D 19

Section	Page
Pipeline HD®	1
1.0 Introduction	9
1.1 About the Serial ATA Interface	9
2.0 Drive Specifications	11
2.1 Specification summary tables	11
2.2 Formatted capacity	13
2.2.1 LBA mode	13
2.3 Default logical geometry	13
2.4 Recording and interface technology	13
2.5 Physical characteristics	14
2.6 Seek time	14
2.7 Start/stop times	14
2.8 Power specifications	14
2.8.1 Power consumption	15
2.8.2 Conducted noise	17
2.8.3 Voltage tolerance	17
2.8.4 Power-management modes	17
2.9 Environmental specifications	18
2.9.1 Drive case temperature	18
2.9.2 Temperature gradient	18
2.9.3 Humidity	18
2.9.4 Altitude	18
2.9.5 Shock	18
2.9.6 Vibration	19
2.10 Acoustics	20
2.10.1 Test for Prominent Discrete Tones (PDTs)	20
2.11 Electromagnetic immunity	20
2.12 Reliability - Annualized Failure Rate	21
2.13 Warranty	21
2.14 Agency certification	21
2.14.1 Safety certification	21
2.14.2 Electromagnetic compatibility	21
2.14.3 FCC verification	22
2.15 Environmental protection	22
2.15.1 European Union Restriction of Hazardous Substances (RoHS) Directive	22
2.15.2 China Restriction of Hazardous Substances (RoHS) Directive	22
2.16 Corrosive environment	23
3.0 Configuring and Mounting the Drive	25
3.1 Handling and static-discharge precautions	25
3.2 Configuring the drive	25
3.3 Serial ATA cables and connectors	25
3.4 Drive mounting	26
4.0 Serial ATA Interface	29
4.1 Hot-Plug compatibility	29
4.2 Serial ATA device plug connector pin definitions	29
4.3 Supported ATA commands	30
4.3.1 Identify Device command	33
4.3.2 Set Features command	37
4.3.3 S.M.A.R.T. commands	38
A	39
B	39
C	39
D	39
E	39
F	39
G	39
H	39
I	39
K	39
L	40
M	40
N	40
O	40
P	40
R	40
S	40
T	41
U	41
V	41