Seagate ST120FP0021 Seagate 600 Pro SSD Product Manual - Page 24
Drive Mounting
View all Seagate ST120FP0021 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3.4 DRIVE MOUNTING You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottommounting holes. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 in (0.76 mm) around the entire perimeter of the drive for cooling as a guideline. Please refer to Section 3.5 for final cooling requirements. • Use only M3 x 0.5 metric mounting screws. • Four (4) threads (0.080 in) minimum screw engagement recommended. Also ensure maximum screw length does not bot- tom out in mounting holes. • Do not overtighten the mounting screws (maximum torque: 4.5 in-lb, ± 0.45 in-lb). Refer to Figure 3 for detailed mounting configuration dimensions. Weight: 7mm models 0.220 pounds 100 grams Note. These dimensions conform to the Small Form Factor Standard documented in SFF-8201 and SFF-8223 found at www.sffcommittee.org. Figure 3. Mounting configuration dimensions (7mm models) SEAGATE 600 PRO SSD PRODUCT MANUAL, REV. B 20