Seagate ST160LT007 Momentus Thin SATA Product Manual - Page 26
Notes, Table 7, Serial ATA connector pin definitions
View all Seagate ST160LT007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Table 7: Serial ATA connector pin definitions Segment Pin P1 P2 P3 P4 P5 P6 P7 P8 Power P9 P10 P11 P12 P13 P14 P15 Function V33 V33 V33 Ground Ground Ground V5 V5 V5 Ground Reserved Ground V12 V12 V12 Definition 3.3V power 3.3V power 3.3V power, pre-charge, 2nd mate 1st mate 2nd mate 2nd mate 5V power, pre-charge, 2nd mate 5V power 5V power 2nd mate The pin corresponding to P11 in the backplane receptacle connector is also reserved The corresponding pin to be mated with P11 in the power cable receptacle connector shall always be grounded 1st mate. 12V power, pre-charge, 2nd mate 12V power 12V power Notes: 1. All pins are in a single row, with a 1.27 mm (0.050") pitch. 2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are: • the ground pins P4 and P12. • the pre-charge power pins and the other ground pins. • the signal pins and the rest of the power pins. 3. There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate backplane configuration. 4. All used voltage pins (Vx) must be terminated. 20 Momentus Thin Series SATA Product Manual, Rev. B