Home » Seagate Manuals » Hard Drives » Seagate ST160LT007 » Manual Viewer

Seagate ST160LT007 Momentus Thin SATA Product Manual - Page 32

Note.

Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Word 95-99 100- 103 104- 118 119 120 121- 127 128 129- 159 160- 254 255 Description ATA-reserved Total number of user-addressable LBA sectors available (see Section 2.2 for related information) These words are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh. ATA-reserved Free Fall Protection support (bit 5) Free Fall Protection enable/disable (bit 5) ATA reserved Security status Seagate-reserved ATA-reserved Integrity word Value 0000H ST92503010AS = 488,397,168 ST91603010AS = 312,581,808 0000H 1 = Free Fall Protection supported 0 = Free Fall Protection not supported 1 = Free Fall Protection feature is enabled 0 = Free Fall Protection feature is disabled 0000H 0001H xxxxH 0000H xxA5H Note. See the bit descriptions below for words 63, 88, and 93 of the Identify Drive data: Description (if bit is set to 1) Bit Word 63 0 Multiword DMA mode 0 is supported. 1 Multiword DMA mode 1 is supported. 2 Multiword DMA mode 2 is supported. 8 Multiword DMA mode 0 is currently active. 9 Multiword DMA mode 1 is currently active. 10 Multiword DMA mode 2 is currently active. 26 Momentus Thin Series SATA Product Manual, Rev. B

Section	Page
1.0 Introduction	7
1.1 About the Serial ATA interface	8
2.0 Drive specifications	9
2.1 Specification summary table	9
2.2 Formatted capacity	11
2.2.1 LBA mode	11
2.3 Default logical geometry	11
2.4 Physical organization	11
2.5 Recording and interface technology	11
2.6 Physical characteristics	12
2.7 Seek time	12
2.8 Start/stop times	12
2.9 Power specifications	13
2.9.1 Power consumption	13
2.9.1.1 Typical current profile	14
2.9.2 Deferred spinup	14
2.9.3 Conducted noise	14
2.9.4 Voltage tolerance	14
2.9.5 Power-management modes	15
2.10 Environmental specifications	16
2.10.1 Ambient temperature	16
2.10.2 Temperature gradient	16
2.10.3 Humidity	16
2.10.3.1 Relative humidity	16
2.10.3.2 Wet bulb temperature	16
2.10.4 Altitude	16
2.10.5 Shock	17
2.10.5.1 Operating shock	17
2.10.5.2 Nonoperating shock	17
2.10.6 Vibration	17
2.10.6.1 Operating vibration	17
2.10.6.2 Nonoperating vibration	17
2.11 Acoustics	18
2.12 Electromagnetic immunity	18
2.13 Reliability	19
2.14 Agency certification	19
2.14.1 Safety certification	19
2.14.2 Electromagnetic compatibility	19
2.14.3 FCC verification	20
2.15 Environmental protection	21
2.15.1 European Union Restriction of Hazardous Substances (RoHS)	21
2.15.2 China Restriction of Hazardous Substances (RoHS) Directive	21
2.16 Corrosive environment	21
3.0 Configuring and mounting the drive	22
3.1 Handling and static-discharge precautions	22
3.2 Configuring the drive	23
3.3 Serial ATA cables and connectors	23
3.4 Drive mounting	24
4.0 Serial ATA (SATA) interface	25
4.1 Hot-Plug compatibility	25
4.2 Serial ATA device plug connector pin definitions	25
4.3 Supported ATA commands	27
4.3.1 Identify Device command	30
4.3.2 Set Features command	34
4.3.3 S.M.A.R.T. commands	35
5.0 Seagate Technology support services	36
Index	39
A	39
B	39
C	39
D	39
E	39
F	39
G	39
H	40
I	40
K	40
L	40
M	40
N	40
O	40
P	40
Q	40
R	40
S	41
T	41
U	41
V	41