Seagate ST320005SHA10G-RK BlackArmor NAS 440/420 User Guide - Page 53
Removing and Replacing a Disk Drive, WARNING: ESD Precautions, Removing a Hard Drive
UPC - 763649015193
View all Seagate ST320005SHA10G-RK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Removing and Replacing a Disk Drive Removing and Replacing a Disk Drive Follow these steps to replace a hard drive in the BlackArmor® NAS 440/420 server. You may also use these instructions to replace a damaged hard drive carrier. Note: Only Seagate hard drives can be used for replacement. Failure to use Seagate replacement parts can and will forfeit the warranty period of the BlackArmor NAS 440/420. WARNING: ESD Precautions Electrostatic discharge (ESD) can damage the processor, hard drives, main board, memory modules (RAM), and other BlackArmor components. Always observe the following precautions before replacing a hard drive: • Do not remove a component from its protective packaging until you are ready to install it. • Do not touch the component pins, leads, or circuitry. • Wear a wrist grounding strap and attach it to a metal part of the system before handling components. If a wrist strap is not available, maintain contact with the system throughout any procedure requiring ESD protection. • Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and foam packing. Removing a Hard Drive 1. Open the BlackArmor Manager Web interface. 2. In the menu bar, select Storage, and then click Disk Manager. 3. Beside the failed disk drive, click the Safely Remove Disk icon, and then click OK. 4. Open the front panel of the server. BlackArmor® NAS 440/420 User Guide (Version 3) 55