Seagate ST320005SHA10G-RK BlackArmor NAS 440/420 User Guide - Page 54
Never remove more than one drive at a time. Failure to do so will result in, data loss., Warning
UPC - 763649015193
View all Seagate ST320005SHA10G-RK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Removing and Replacing a Disk Drive 5. Locate the failed hard drive. Ensure that there is no activity on the drive by checking its LED-it should not be illuminated. Warning: Never remove more than one drive at a time. Failure to do so will result in data loss. 6. Press down on the orange button to release the failed drive from the server. If the server is powered on, wait until the drive stops spinning (approximately one minute) before continuing. 7. Holding the handle, gently slide the hard drive partially out of the server until you can get a firm grip on the drive itself, and then remove the drive from the server. Because the hard drive is heavy, do not completely remove it or carry it by the plastic handle. Hold the drive firmly on the top and bottom. Caution: The hard drive may be hot when removed. BlackArmor® NAS 440/420 User Guide (Version 3) 56