Seagate ST320005SHA10G-RK BlackArmor NAS 440/420 User Guide - Page 55
Replacing a Hard Drive, Claim Disk, Recover
UPC - 763649015193
View all Seagate ST320005SHA10G-RK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Removing and Replacing a Disk Drive 8. Position (hold) the hard drive/carrier so that the drive label is facing up and the text is readable (not upside down). 9. Carefully bend the left side of the plastic carrier outward to release the failed drive from the carrier. 10. Remove the failed hard from the plastic carrier enclosure. Replacing a Hard Drive 1. Place the new hard drive into the carrier, ensuring that the four pins hold the drive securely in place. If you are replacing a damaged hard drive carrier, place the drive removed from the damaged carrier into the replacement carrier. 2. Carefully slide the new drive into the server. Push firmly to install it completely, and then close the handle to lock the drive in place. The hard drive's LED should turn green. 3. Close the front panel of the server. 4. In BlackArmor Manager, the drive's status changes to Foreign. 5. Click the Claim Disk icon, and then click OK. The drive's status changes to Good. 6. Click the Recover icon, and then click OK. BlackArmor® NAS 440/420 User Guide (Version 3) 57