Seagate ST3300007LC Cheetah 10K.7 SCSI Product Manual - Page 63
Interface requirements
UPC - 000055651318
View all Seagate ST3300007LC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
9.0 Interface requirements This section partially describes the interface requirements as implemented on the drives. 9.1 General description This section describes in essentially general terms the interface requirements supported by the Cheetah 10K.7 SCSI. No attempt is made to describe all of the minute details of conditions and constraints that must be considered by designers when designing a system in which this family of drives can properly operate. Seagate declares that the drives operate in accordance with the appropriate ANSI Standards referenced in various places herein, with exceptions as noted herein or in the Seagate SCSI Interface Product Manual. 9.2 SCSI interface messages supported Table 4 lists the messages supported by the SCSI-2 and SCSI-3 modes of the Cheetah 10K.7 SCSI family drives. Table 4: SCSI messages supported by Cheetah 10K.7 SCSI family drives Message name Abort Abort-tag Bus device reset Clear ACA Clear queue Command complete Continue I/O process Disconnect Extended messages Identify Ignore wide residue (two bytes) Initiate recovery Initiator detected error Linked command complete Linked command complete with flag Message parity error Message reject Modify data pointer No operation Parallel Protocol Request Queue tag messages (two bytes) ACA Head of queue tag Ordered queue tag Simple queue tag Message code 06h 0Dh 0Ch 16h 0Eh 00h 12h 04h 01h[1] 80h-FFh 23h 0Fh 05h 0Ah 0Bh 09h 07h [1] 08h 24h 21h 22h 20h Supported Y Y Y N Y Y N Y Y Y Y N Y Y Y Y Y N Y Y N Y Y Y Cheetah 10K.7 SCSI Product Manual, Rev. D 53