Seagate ST3300007LC Cheetah 10K.7 SCSI Product Manual - Page 81
adapter/initiator. The cable length restriction limits the total number of devices allowed.
UPC - 000055651318
View all Seagate ST3300007LC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
LW/LWV Model Terminator [7] [6] 2 through X SCSI devices [4] SCSI ID 7 [5] Pin 1 [2] (check your adapter for Pin 1 location) [1] SCSI ID 1 Host Adapter PCB [3] SCSI ID 0 [2] [1] Closed end type 68-pin connector used. Terminators enabled. [2] Open end type (in-line application) connector used. [3] Host need not be on the end of the bus. Another device can be on the end with the terminator, the host having no terminator. [4] Total interface cable length must not exceed that specified in ANSI document T10/1302D (including host adapter/initiator). The cable length restriction limits the total number of devices allowed. [5] SCSI ID7 has highest arbitration priority, then ID15 to ID8 (ID 8 has the very lowest priority). [6] Last drive on the bus. [7] Open-end type 68-pin connector used. If end device, use external terminator and closed-end type 68-pin connector. Figure 24. SCSI daisy chain interface cabling for LW drives Cheetah 10K.7 SCSI Product Manual, Rev. D 71