Seagate ST3300007LC Cheetah 10K.7 SCSI Product Manual - Page 74
Synchronous data transfer, Physical interface
UPC - 000055651318
View all Seagate ST3300007LC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
9.5 Synchronous data transfer The data transfer period to be used by the drive and the initiator is established by an exchange of messages during the Message Phase of operation. See the section on message protocol in the SCSI Interface Product Manual, part number 75789509. 9.5.1 Synchronous data transfer periods supported In the following tables, M is the synchronous period value (in the transfer rate negotiation message) that represents the associated transfer period and transfer rate values. Table 11 lists the synchronous data transfer periods supported by the drive in DT DATA phase. DT DATA phase is only allowed when using the LVD interface. Table 11: Synchronous DT DATA transfer periods M (decimal) 8 9 10 12 25 Transfer period (nanoseconds) 6.25 12.5 25 50 100 Transfer rate (megatransfers/second) 160.0 80.0 40.0 20.0 10.0 Transfer rate (Mbytes/second) on wide bus 320.0 160.0 80.0 40.0 20.0 Table 12 lists the synchronous data transfer periods supported by the drive in ST DATA phase. ST DATA phase is allowed with either LVD or SE interface except as noted. Table 12: Synchronous ST DATA transfer periods M (decimal) 10 12 25 50 Transfer period (nanoseconds) 25 50 100 200 Transfer rate (megatransfers/second) 40.01 20.0 10.0 5.0 1. This transfer rate is only allowed when using the LVD interface. 9.5.2 REQ/ACK offset Cheetah 10K.7 SCSI family drives support REQ/ACK offset values from 7 to 63 (3Fh). Offsets of 1 through 6 are negotiated to 0 (asynchronous transfer). 9.6 Physical interface This section describes the connectors, cables, signals, terminators and bus timing of the DC and SCSI I/O interface. See Section 9.8 and Section 9.9 for additional terminator information. Figures 22 and 23 show the locations of the DC power connector, SCSI interface connector, drive select headers, and option select headers. Details of the physical, electrical and logical characteristics are given in sections following, while the SCSI operational aspects of Seagate drive interfaces are given in the SCSI Interface Product Manual. 64 Cheetah 10K.7 SCSI Product Manual, Rev. D