Seagate ST33000651SS Constellation ES (.1) SATA Product Manual - Page 35

Drive mounting

Get Seagate ST33000651SS PDF manuals and user guides View all Seagate ST33000651SS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 5 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling. • Use only 6-32 UNC mounting screws. • The screws should be inserted no more than 0.150 in (3.81mm) into the bottom or side mounting holes. • Do not overtighten the mounting screws (maximum torque: 6 in-lb). Weight: (maximum) 2TB models 710g (1.565 lb) 1TB models 640g (1.411 lb) 500GB models 610g (1.345 lb) Note. These dimensions conform to the Small Form Factor Standard documented in SFF-8301 and SFF-8323 found at www.sffcommittee.org in mm Breather Hole in mm Figure 5. Mounting dimensions-top, side and end view Constellation ES Serial ATA Product Manual, Rev. D in mm 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Constellation ES Serial ATA Product Manual, Rev. D
29
3.4
Drive mounting
You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the
bottom-mounting holes. See Figure 5 for drive mounting dimensions. Follow these important mounting precau-
tions when mounting the drive:
•
Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
•
Use only 6-32 UNC mounting screws.
•
The screws should be inserted no more than 0.150 in (3.81mm) into the bottom or side mounting holes.
•
Do not overtighten the mounting screws (maximum torque: 6 in-lb).
Weight: (maximum)
2TB models
1TB models
500GB models
710g (1.565 lb)
640g (1.411 lb)
610g (1.345 lb)
Note.
These dimensions conform to the Small Form Factor Standard documented in SFF-8301 and
SFF-8323 found at
www
.sf
fcommittee.org
Breather
Hole
mm
in
mm
in
mm
in
Figure 5. Mounting dimensions—top, side and end view