Home » Seagate Manuals » Hard Drives » Seagate ST3300457FC » Manual Viewer

Seagate ST3300457FC Cheetah 15K.7 FC Product Manual - Page 39

Vibration, Acoustics, Air cleanliness

View all Seagate ST3300457FC manuals

Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

7.4.4.2 Vibration a. Operating-normal The drive as installed for normal operation, shall comply with the complete specified performance while subjected to continuous vibration not exceeding 10 - 300 Hz 301- 500 Hz 1.0 G RMS (0 to peak) 0.5 G RMS (0 to peak) Vibration may be applied in the X, Y, or Z axis. b. Operating-abnormal Equipment as installed for normal operation shall not incur physical damage while subjected to periodic vibration not exceeding: 15 minutes of duration at major resonant frequency Vibration occurring at these levels may degrade operational performance during the abnormal vibration period. Specified operational performance will continue when normal operating vibration levels are resumed. This assumes system recovery routines are available. Operating abnormal translational random flat profile 5 - 500 Hz 10 - 300 Hz 0.75 G (0 to peak) 0.0029 G2/Hz c. Non-operating The limits of non-operating vibration shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive shall not incur physical damage or degraded performance as a result of continuous vibration not exceeding 5 - 22 Hz 22 - 350 Hz 350 - 500 Hz 0.25 G (0 to peak, linear, swept sine, 0.5 octive/min) 3 G (0 to peak, linear, swept sine, 0.5 octive/min) 1 G (0 to peak, linear, swept sine, 0.5 octive/min) Vibration may be applied in the X, Y, or Z axis. 7.4.5 Acoustics Sound power during idle mode shall be 3.4 bels typical when measured to ISO 7779 specification. Sound power while operating shall be 3.8 bels typical when measured to ISO 7779 specification. There will not be any discrete tones more than 10 dB above the masking noise on typical drives when measured according to Seagate specification 30553-001. There will not be any tones more than 24 dB above the masking noise on any drive. 7.4.6 Air cleanliness The drive is designed to operate in a typical office environment with minimal environmental control. Cheetah 15K.7 FC Product Manual, Rev. C 33

Section	Page
1.0 Seagate Technology support services	7
2.0 Scope	8
3.0 Applicable standards and reference documentation	9
3.1 Standards	9
3.1.1 Electromagnetic compatibility	9
3.1.1.1 Electromagnetic susceptibility	9
3.1.2 Electromagnetic compliance	10
3.2 European Union Restriction of Hazardous Substances (RoHS)	10
3.3 Reference documents	11
4.0 General description	12
4.1 Standard features	13
4.2 Media description	14
4.3 Performance	14
4.4 Reliability	14
4.5 Formatted capacities	14
4.5.1 Programmable drive capacity	15
4.6 Factory-installed options	15
4.7 User-installed accessories	15
5.0 Performance characteristics	16
5.1 Internal drive characteristics	16
5.2 Seek performance characteristics	16
5.2.1 Access time	16
5.2.2 Format command execution time (minutes)	17
5.2.3 General performance characteristics	17
5.3 Start/stop time	17
5.4 Prefetch/multi-segmented cache control	18
5.5 Cache operation	18
5.5.1 Caching write data	19
5.5.2 Prefetch operation	19
6.0 Reliability specifications	20
6.1 Error rates	20
6.1.1 Recoverable Errors	20
6.1.2 Unrecoverable Errors	20
6.1.3 Seek errors	21
6.1.4 Interface errors	21
6.2 Reliability and service	21
6.2.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)	21
6.2.2 Preventive maintenance	21
6.2.3 Hot plugging the drive	21
6.2.4 S.M.A.R.T.	22
6.2.5 Thermal monitor	23
6.2.6 Drive Self Test (DST)	24
6.2.6.1 DST failure definition	24
6.2.6.2 Implementation	24
6.2.7 Product warranty	26
7.0 Physical/electrical specifications	27
7.1 AC power requirements	27
7.2 DC power requirements	27
7.2.1 Conducted noise immunity	30
7.2.2 Power sequencing	30
7.2.3 Current profiles	30
7.3 Power dissipation	33
7.4 Environmental limits	35
7.4.1 Temperature	35
7.4.2 Relative humidity	36
7.4.3 Effective altitude (sea level)	36
7.4.4 Shock and vibration	37
7.4.4.1 Shock	37
7.4.4.2 Vibration	39
7.4.5 Acoustics	39
7.4.6 Air cleanliness	39
7.4.7 Corrosive environment	40
7.4.8 RoHS compliance statement	40
7.4.9 Electromagnetic susceptibility	40
7.5 Mechanical specifications	41
8.0 About FIPS	42
9.0 About self-encrypting drives	43
9.1 Data encryption	43
9.2 Controlled access	43
9.2.1 Admin SP	43
9.2.2 Locking SP	44
9.2.3 Default password	44
9.3 Random number generator (RNG)	44
9.4 Drive locking	44
9.5 Data bands	44
9.6 Cryptographic erase	45
9.7 Authenticated firmware download	45
9.8 Power requirements	45
9.9 Supported commands	45
10.0 Defect and error management	46
10.1 Drive internal defects/errors	46
10.2 Drive error recovery procedures	46
10.3 FC-AL system errors	48
10.4 Background Media Scan	49
10.5 Media Pre-Scan	49
10.6 Deferred Auto-Reallocation	49
10.7 Idle Read After Write	50
11.0 Installation	51
11.1 Drive ID/option selection	51
11.2 Drive orientation	51
11.3 Cooling	52
11.4 Drive mounting	53
11.5 Grounding	53
12.0 Interface requirements	54
12.1 FC-AL features	54
12.1.1 Fibre Channel link service frames	54
12.1.2 Fibre Channel task management functions	55
12.1.3 Fibre Channel task management responses	55
12.1.4 Fibre Channel port login	56
12.1.5 Fibre Channel port login accept	57
12.1.6 Fibre Channel Process Login	57
12.1.7 Fibre Channel Process Login Accept	58
12.1.8 Fibre Channel fabric login	58
12.1.9 Fibre Channel fabric accept login	59
12.1.10 Fibre Channel Arbitrated Loop options	60
12.2 Dual port support	60
12.3 SCSI commands supported	60
12.3.1 Inquiry data	65
12.3.2 Mode Sense data	65
12.4 Miscellaneous operating features and conditions	70
12.5 FC-AL physical interface	71
12.5.1 Physical characteristics	71
12.5.1.1 Physical description	71
12.5.2 Connector requirements	72
12.5.3 Electrical description	72
12.5.4 Pin descriptions	72
12.5.5 FC-AL transmitters and receivers	73
12.5.6 Power	74
12.5.7 Fault LED Out	74
12.5.8 Active LED Out	75
12.5.9 Enable port bypass signals	75
12.5.10 Motor start controls	75
12.5.11 SEL_6 through SEL_0 ID lines	76
12.5.11.1 Parallel Enclosure Services Interface (ESI)	76
12.5.12 Device control codes	78
12.6 Signal characteristics	78
12.6.1 TTL input characteristics	78
12.6.2 LED driver signals	79
12.6.3 FC Differential output	79

Match case Limit results 1 per page

Cheetah 15K.7 FC Product Manual, Rev. C

7.4.4.2

Vibration

a. Operating—normal

The drive as installed for normal operation, shall comply with the complete specified performance while

subjected to continuous vibration not exceeding

10 – 300 Hz

1.0 G RMS (0 to peak)

301– 500 Hz

0.5 G RMS (0 to peak)

Vibration may be applied in the X, Y, or Z axis.

b. Operating—abnormal

Equipment as installed for normal operation shall not incur physical damage while subjected to periodic

vibration not exceeding:

15 minutes of duration at major resonant frequency

Vibration occurring at these levels may degrade operational performance during the abnormal vibration

period. Specified operational performance will continue when normal operating vibration levels are

resumed. This assumes system recovery routines are available.

Operating abnormal translational random flat profile

5 – 500 Hz

0.75 G (0 to peak)

10 - 300 Hz

0.0029 G

/Hz

c. Non-operating

The limits of non-operating vibration shall apply to all conditions of handling and transportation. This

includes both isolated drives and integrated drives.

The drive shall not incur physical damage or degraded performance as a result of continuous vibration not

exceeding

5 – 22 Hz

0.25 G (0 to peak, linear, swept sine, 0.5 octive/min)

22 - 350 Hz

3 G (0 to peak, linear, swept sine, 0.5 octive/min)

350 - 500 Hz

1 G (0 to peak, linear, swept sine, 0.5 octive/min)

Vibration may be applied in the X, Y, or Z axis.

7.4.5

Acoustics

Sound power during idle mode shall be 3.4 bels typical when measured to ISO 7779 specification. Sound

power while operating shall be 3.8 bels typical when measured to ISO 7779 specification.

There will not be any discrete tones more than 10 dB above the masking noise on typical drives when mea-

sured according to Seagate specification 30553-001. There will not be any tones more than 24 dB above the

masking noise on any drive.

7.4.6

Air cleanliness

The drive is designed to operate in a typical office environment with minimal environmental control.