Home » Seagate Manuals » Hard Drives » Seagate ST3300457FC » Manual Viewer

Seagate ST3300457FC Cheetah 15K.7 SAS Product Manual - Page 8

Scope

View all Seagate ST3300457FC manuals

Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

2.0 Scope This manual describes Seagate Technology® LLC, Cheetah® SAS (Serial Attached SCSI) disk drives. Cheetah 15K.7 drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number 100293071) describes the general SAS characteristics of Cheetah 15K.7 and other Seagate SAS drives. The Self-Encrypting Drive (SED) Users Guide, part number 100515636 describes the interface, general operation and security features available on SED drives. Note. Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models before a differentiation between drive-based encryption and other forms of encryption was necessary. Model Number ST3600057SS ST3600957SS ST3600857SS ST3450857SS ST3450757SS ST3300457SS ST3300657SS ST3300557SS ST3300457SS Capacity 600GB 450GB 300GB Self-Encrypting Drive (SED) FIPS 140-2 Level 2 certified No No Yes No Yes Yes No No Yes No Yes Yes No No Yes No Yes Yes For more information on FIPS 140-2 Level 2 certification see Section 8.0 on page 35. 2 Cheetah 15K.7 SAS Product Manual, Rev. C

Section	Page
1.0 Seagate Technology support services	7
2.0 Scope	8
3.0 Standards, compliance and reference documents	9
3.1 Standards	9
3.1.1 Electromagnetic compatibility	9
3.1.1.1 Electromagnetic susceptibility	9
3.2 Compliance	10
3.2.1 Electromagnetic compliance	10
3.3 European Union Restriction of Hazardous Substances (RoHS)	10
3.4 Reference documents	11
4.0 General description	12
4.1 Standard features	13
4.2 Media description	13
4.3 Performance	13
4.4 Reliability	14
4.5 Formatted capacities	14
4.6 Programmable drive capacity	14
4.7 Factory-installed options	14
5.0 Performance characteristics	15
5.1 Internal drive characteristics	15
5.2 Seek time	15
5.2.1 Access time	15
5.2.2 Format command execution time (minutes)	16
5.2.3 General performance characteristics	16
5.3 Start/stop time	16
5.4 Prefetch/multi-segmented cache control	17
5.5 Cache operation	17
5.5.1 Caching write data	18
5.5.2 Prefetch operation	18
6.0 Reliability specifications	19
6.1 Error rates	19
6.1.1 Recoverable Errors	19
6.1.2 Unrecoverable Errors	19
6.1.3 Seek errors	20
6.1.4 Interface errors	20
6.2 Reliability and service	20
6.2.1 Annualized Failrue Rate (AFR) and Mean time between failure (MTBF)	20
6.2.2 Preventive maintenance	20
6.2.3 Hot plugging the drive	20
6.2.4 S.M.A.R.T.	21
6.2.5 Thermal monitor	22
6.2.6 Drive Self Test (DST)	23
6.2.6.1 DST failure definition	23
6.2.6.2 Implementation	23
6.2.7 Product warranty	25
7.0 Physical/electrical specifications	26
7.1 AC power requirements	26
7.2 DC power requirements	26
7.2.1 Conducted noise immunity	30
7.2.2 Power sequencing	30
7.2.3 Current profiles	30
7.3 Power dissipation	33
7.4 Environmental limits	35
7.4.1 Temperature	35
7.4.2 Relative humidity	36
7.4.3 Effective altitude (sea level)	36
7.4.4 Shock and vibration	36
7.4.4.1 Shock	36
7.4.4.2 Vibration	38
7.4.5 Acoustics	39
7.4.6 Air cleanliness	39
7.4.7 Corrosive environment	39
7.4.8 RoHS compliance statement	39
7.4.9 Electromagnetic susceptibility	40
7.5 Mechanical specifications	40
8.0 About FIPS	41
9.0 About self-encrypting drives	42
9.1 Data encryption	42
9.2 Controlled access	42
9.2.1 Admin SP	42
9.2.2 Locking SP	42
9.2.3 Default password	43
9.3 Random number generator (RNG)	43
9.4 Drive locking	43
9.5 Data bands	43
9.6 Cryptographic erase	43
9.7 Authenticated firmware download	43
9.8 Power requirements	44
9.9 Supported commands	44
10.0 Defect and error management	45
10.1 Drive internal defects/errors	45
10.2 Drive error recovery procedures	45
10.3 SAS system errors	47
10.4 Background Media Scan	47
10.5 Media Pre-Scan	48
10.6 Deferred Auto-Reallocation	48
10.7 Idle Read After Write	48
11.0 Installation	49
11.1 Drive orientation	49
11.2 Cooling	49
11.3 Drive mounting	50
11.4 Grounding	50
12.0 Interface requirements	51
12.1 SAS features	51
12.1.1 task management functions	51
12.1.2 task management responses	51
12.2 Dual port support	52
12.3 SCSI commands supported	52
12.3.1 Inquiry data	56
12.3.2 Mode Sense data	57
12.3.2.1 600GBmodel Mode Sense data	58
12.3.2.2 450GB model Mode Sense data	60
12.3.2.3 300GB model Mode Sense data	62
12.4 Miscellaneous operating features and conditions	63
12.4.1 SAS physical interface	64
12.4.2 Physical characteristics	66
12.4.3 Connector requirements	66
12.4.4 Electrical description	67
12.4.5 Pin descriptions	67
12.4.6 SAS transmitters and receivers	68
12.4.7 Power	68
12.5 Signal characteristics	68
12.5.1 Ready LED Out	68
12.5.2 Differential signals	69
12.6 SAS-2 Specification compliance	69
12.7 Additional information	69
Numerics	71
A	71
B	71
C	71
D	71
E	72
F	72
G	72
H	72
I	72
J	72
L	72
M	72
N	73
O	73
P	73
Q	73
R	73
S	73
T	74
U	74
V	74
W	74