Seagate ST34342A Product Manual - Page 22
Additional installation options - jumpers
View all Seagate ST34342A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
18 Medalist 4342, 3232 and 2122, Rev. C Additional installation options 2 46 135 Master with non-ATA compatible slave Enable cable select Figure 5. Non-ATA compatible and cable select jumpers Non-ATA compatible slave jumper If your computer does not recognize your new drive as a master in a two-drive system, the slave drive may not be ATA-compatible. You may be able to solve this problem by installing jumpers on pins 3 and 4 and on pins 5 and 6, as shown in Figure 5.
18
Medalist 4342, 3232 and 2122, Rev. C
Additional installation options
Figure 5. Non-ATA compatible and cable select jumpers
Non-ATA compatible slave jumper
If your computer does not recognize your new drive as a master
in a two-drive system, the slave drive may not be ATA-compati-
ble. You may be able to solve this problem by installing jumpers
on pins 3 and 4 and on pins 5 and 6, as shown in Figure 5.
Master with non-ATA
compatible slave
Enable cable select
135
246