Seagate ST34342A Product Manual - Page 6
What you need, Before you begin - drive
![]() |
View all Seagate ST34342A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2 Medalist 4342, 3232 and 2122, Rev. C What you need • Straight-edge and Phillips screwdrivers • Four 6-32 UNC drive mounting screws • An ATA interface cable (max length: 18 inches) with available 40-pin connector. • An unused drive power cable for your new drive • A bootable system diskette • If you are mounting this 3.5-inch drive in a 5.25-inch drive bay, you need a mounting adapter or frame kit. Also, you may need drive mounting rails if your drive bay is not designed for direct mounting. Before you begin • Make sure your computer is turned off before you open the case. • Read the handling precautions at the right and inspect the drive to make sure that it is not damaged. • Save your foam-lined Seagate® disc drive box. This box has been approved by Seagate for shipping a Seagate disc drive. Using any other container or packing material voids your drive warranty.
![](/manual_guide/products/seagate-st34342a-product-manual-d8b6109/6.png)