Home » Seagate Manuals » Hard Drives » Seagate ST3500630NS » Manual Viewer

Seagate ST3500630NS Product Manual - Page 21

Recording and interface technology, Physical characteristics - 500gb

View all Seagate ST3500630NS manuals

Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

2.4 Recording and interface technology Interface Recording method Recording density, KBPI (kbits/inch max) Track density, KTPI (ktracks/inch avg) Areal density (Gbits/inch2 avg) Spindle speed (RPM) (± 0.2%) Internal data transfer rate (Mbits/sec max) Sustained data transfer rate (Mbytes/sec max) I/O data-transfer rate (Mbytes/sec max) 750GB 500GB 400GB Serial ATA (SATA) Perpendicular 926 813 781 145 128.2 114.4 7,200 1,030 78 72 300 (Ultra DMA mode 5) 320GB 250GB 813 2.5 Physical characteristics Maximum height Maximum width Maximum length Max weight ST3750640NS and ST3750840NS ST3500630NS, ST3500830NS, ST3400620NS, ST3400820NS, ST3320620NS and ST3320820NS ST3250620NS and ST3250820NS Cache buffer ST3750640NS ST3500630NS ST3400620NS ST3320620NS ST3250620NS ST3750840NS ST3500830NS ST3400820NS ST3320820NS ST3250820NS 26.1 mm (1.028 inches) 101.6 mm (4.000 +/- 0.010 inches) 146.99 mm (5.787 inches) 720 grams (1.59 lbs) 635 grams (1.4 lbs) 580 grams (1.28 lbs) 16 Mbytes (16,384 kbytes) 8 Mbytes (8,192 kbytes) Barracuda ES Serial ATA Product Manual, Rev. B 15

Section	Page
1.0 Introduction	7
1.1 About the Serial ATA interface	8
2.0 Drive specifications	9
2.1 Specification summary tables	9
2.2 Formatted capacity	20
2.2.1 LBA mode	20
2.3 Default logical geometry	20
2.4 Recording and interface technology	21
2.5 Physical characteristics	21
2.6 Seek time	22
2.7 Start/stop times	22
2.8 Power specifications	22
2.8.1 Power consumption	22
2.8.1.1 Typical current profiles	23
2.8.2 Conducted noise	24
2.8.3 Voltage tolerance	24
2.8.4 Power-management modes	24
2.9 Environmental specifications	26
2.9.1 Ambient temperature	26
2.9.2 Temperature gradient	26
2.9.3 Humidity	26
2.9.3.1 Relative humidity	26
2.9.3.2 Wet bulb temperature	26
2.9.4 Altitude	26
2.9.5 Shock	26
2.9.5.1 Operating shock	26
2.9.5.2 Nonoperating shock	26
2.9.6 Vibration	27
2.9.6.1 Operating vibration	27
2.9.6.2 Nonoperating vibration	27
2.10 Acoustics	28
2.11 Electromagnetic immunity	28
2.12 Reliability	29
2.12.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)	29
2.13 Agency certification	29
2.13.1 Safety certification	29
2.13.2 Electromagnetic compatibility	29
2.13.3 FCC verification	30
2.14 Environmental protection	30
2.14.1 European Union Restriction of Hazardous Substances (RoHS)	31
2.15 Corrosive environment	31
3.0 Configuring and mounting the drive	33
3.1 Handling and static-discharge precautions	33
3.2 Configuring the drive	34
3.3 Serial ATA cables and connectors	34
3.4 Drive mounting	35
4.0 Serial ATA (SATA) interface	37
4.1 Hot-Plug compatibility	37
4.2 Serial ATA device plug connector pin definitions	38
4.3 Supported ATA commands	39
4.3.1 Identify Device command	41
4.3.2 Set Features command	45
4.3.3 S.M.A.R.T. commands	46
5.0 Seagate Technology support services	47
Index	53
A	53
B	53
C	53
D	53
E	53
F	53
G	53
H	53
I	53
K	54
L	54
M	54
N	54
O	54
P	54
Q	54
R	54
S	54
T	55
U	55
V	55