Seagate ST9100828A Momentus 5400.3 PATA Product Manual - Page 12

Table 1: Specifications for 100 and 80 Gbyte models Drive specification Shock, nonoperating (Gs max at 1 msec) Shock, nonoperating (Gs max at 0.5 msec) Vibration, operating (max displacement may apply below 10 hz) Vibration, nonoperating (max displacement may apply below 22 hz) Drive acoustics, sound power (bels), 2 disc Idle** Performance seek Nonrecoverable read errors Annualized Failure Rate (AFR) Load/Unload (U/UL) cycles ST9100828A 900 400 1.0 Gs (0 to peak, 5-500 Hz) ST980815A 5.0 Gs (0 to peak, 5-500 Hz) 2.4 (typical) 2.6 (max) 2.9 (typical) 3.1 (max) 1 per 1014 bits read 0.60% 25°C, 50% relative humidity 600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 20% relative humidity 60°C, 20% relative humidity Warranty 600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles 5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur, according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. ***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption. 6 Momentus 5400.3 PATA Product Manual, Rev. C