Seagate ST9100828A Momentus 5400.3 PATA Product Manual - Page 14

Drive specification, ST960815A, ST940815A

Page 14 highlights

Table 1: Specifications for 60 and 40 Gbyte models Drive specification Shock, nonoperating (Gs max at 1 msec) Shock, nonoperating (Gs max at 0.5 msec) Vibration, operating (max displacement may apply below 10 hz) Vibration, nonoperating (max displacement may apply below 22 hz) Drive acoustics, sound power (bels), 2 disc Idle** Performance seek Nonrecoverable read errors Annualized Failure Rate (AFR) Load/Unload (U/UL) cycles ST960815A 900 400 ST940815A 1.0 Gs (0 to peak, 5-500 Hz) 5.0 Gs (0 to peak, 5-500 Hz) 2.4 (typical) 2.6 (max) 2.9 (typical) 3.1 (max) 1 per 1014 bits read

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

8
Momentus 5400.3 PATA Product Manual, Rev. C
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur, according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels
.
***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby
modes will not contribute to battery power consumption.
Shock, nonoperating (Gs max at 1 msec)
900
Shock, nonoperating (Gs max at 0.5 msec)
400
Vibration, operating
(max displacement may apply below 10 hz)
1.0 Gs (0 to peak, 5–500 Hz)
Vibration, nonoperating
(max displacement may apply below 22 hz)
5.0 Gs (0 to peak, 5–500 Hz)
Drive acoustics, sound power (bels), 2 disc
Idle**
2.4 (typical)
2.6 (max)
Performance seek
2.9 (typical)
3.1 (max)
Nonrecoverable read errors
1 per 10
14
bits read
Annualized Failure Rate (AFR)
<0.60%
Load/Unload (U/UL) cycles
25°C, 50% relative humidity
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 20% relative humidity
60°C, 20% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
Warranty
5 years on distribution units.
To determine the warranty for a specific drive, use a web
browser to access the following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You
will be asked to provide the drive serial number, model num-
ber (or part number) and country of purchase. The system
will display the warranty information for your drive.
Table 1:
Specifications for 60 and 40 Gbyte models
Drive specification
ST960815A
ST940815A