Home » Seagate Manuals » Hard Drives » Seagate ST9100828A » Manual Viewer

Seagate ST9100828A Momentus 5400.3 PATA Product Manual - Page 15

Formatted capacity, Default logical geometry, Physical organization

Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

2.2 Formatted capacity Model ST9160821A ST9120822A ST9100828A ST980815A ST960815A ST940815A Formatted capacity* 160 Gbytes 120 Gbytes 100 Gbytes 80 Gbytes 60 Gbytes 40 Gbytes Guaranteed sectors 312,581,808 234,441,648 195,371,568 156,301,488 117,410,240 78,140,160 Bytes per sector 512 512 512 512 512 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.3 Default logical geometry Cylinders 16,383 Read/write heads 16 Sectors per track 63 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. 2.4 Physical organization Model ST9160821A ST9120822A ST9100828A ST980815A ST960815A ST940815A Read/write heads 4 3 3 2 2 1 Number of discs 2 2 2 1 1 1 Momentus 5400.3 PATA Product Manual, Rev. C 9

Section	Page
1.0 Introduction	7
2.0 Drive specifications	9
2.1 Specification summary	9
2.2 Formatted capacity	15
2.3 Default logical geometry	15
2.4 Physical organization	15
2.5 Recording and interface technology	16
2.6 Physical characteristics	16
2.7 Seek time	17
2.8 Time to ready	17
2.9 Power specifications	18
2.9.1 Power consumption	18
2.9.1.1 Typical current profile	19
2.9.2 Conducted noise	19
2.9.3 Voltage tolerance	19
2.9.4 Power-management modes	20
2.10 Environmental specifications	21
2.10.1 Ambient temperature	21
2.10.2 Temperature gradient	21
2.10.3 Humidity	21
2.10.3.1 Relative humidity	21
2.10.3.2 Wet bulb temperature	21
2.10.4 Altitude	21
2.10.5 Shock	22
2.10.5.1 Operating shock	22
2.10.5.2 Nonoperating shock	22
2.10.6 Vibration	22
2.10.6.1 Operating vibration	22
2.10.6.2 Nonoperating vibration	22
2.11 Acoustics	23
2.12 Electromagnetic immunity	23
2.13 Reliability	24
2.14 Agency certification	24
2.14.1 Safety certification	24
2.14.2 Electromagnetic compatibility	24
2.14.3 FCC verification	25
2.15 Environmental protection	26
2.15.1 European Union Restriction of Hazardous Substances (RoHS)	26
2.16 Corrosive environment	26
3.0 Configuring and mounting the drive	27
3.1 Handling and static discharge precautions	27
3.2 Jumper settings	28
3.2.1 Master/slave configuration	28
3.2.2 Cable-select option	28
3.3 Drive mounting	29
4.0 ATA interface	31
4.1 ATA interface signals and connector pins	31
4.1.1 Supported ATA commands	32
4.1.2 Identify Device command	35
4.1.3 Set Features command	38
5.0 Compatibility summary	39
5.1 Installation considerations	39
5.2 BIOS versions tested	41
5.3 Operating system versions tested	42
5.4 Compatibility test configurations	42
5.5 Software utilities	42
5.6 Other certification	42