Seagate ST9750420AS Momentus 7200 FDE.1 SATA Product Manual - Page 24

18

Momentus 7200 FDE.1 SATA Product Manual, Rev. B

2.14.2

Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec-

tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product

standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and

the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous

paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply

with the directives when used in the test systems, we cannot guarantee that all systems will comply with the

directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O

cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators

should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para-

graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic

Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information

and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil-

ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog-

nized lab.

•

Certificate number: STX - Momentus 72003 (B)

•

Trade name or applicant: Seagate Technology LLC

•

Manufacturing date: April 23, 2008

•

Manufacturer/nationality: USA and China

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548

1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi-

cation Authority (ACA).

2.14.3

FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached

as an external device). As such, each drive is considered to be a subassembly even when it is individually mar-

keted to the customer. As a subassembly, no Federal Communications Commission verification or certification

of the device is required.

Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total

assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B

computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is

likely to result in interference to radio and television reception.

Radio and television interference.

This equipment generates and uses radio frequency energy and if not

installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio

and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installa-

tion. However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause interference to radio or television, which can be determined by turning the equipment on and off,

you are encouraged to try one or more of the following corrective measures:

•

Reorient the receiving antenna.

•

Move the device to one side or the other of the radio or TV.

Section	Page
1.0 Introduction 1	3
1.1 System requirements 1	3
1.2 About Momentus 7200 FDE.1 SATA disc drives 2	3
1.2.1 Drive state upon shipment 3	3
2.0 Drive specifications 5	3
2.1 Specification summary table 5	3
2.2 Formatted capacity 7	3
2.2.1 LBA mode 7	3
2.3 Default logical geometry 7	3
2.4 Physical organization 8	3
2.5 Recording and interface technology 8	3
2.6 Physical characteristics 8	3
2.7 Seek time 9	3
2.8 Start/stop times 9	3
2.9 Power specifications 10	3
2.9.1 Power consumption 10	3
2.9.2 Conducted noise 11	3
2.9.3 Voltage tolerance 11	3
2.9.4 Power-management modes 12	3
2.10 Environmental specifications 13	3
2.10.1 Ambient temperature 13	3
2.10.2 Temperature gradient 13	3
2.10.3 Humidity 13	3
2.10.4 Altitude 13	3
2.10.5 Shock 14	3
2.10.6 Vibration 14	3
2.11 Acoustics 15	3
2.12 Electromagnetic immunity 15	3
2.13 Reliability 17	3
2.13.1 Free Fall Protection feature 17	3
2.14 Agency certification 17	3
2.14.1 Safety certification 17	3
2.14.2 Electromagnetic compatibility 18	3
2.14.3 FCC verification 18	3
2.15 Environmental protection 20	3
2.15.1 European Union Restriction of Hazardous Substances (RoHS) 20	3
2.15.2 China Restriction of Hazardous Substances (RoHS) Directive 20	3
2.16 Corrosive environment 20	3
3.0 Configuring and mounting the drive 21	3
3.1 Handling and static-discharge precautions 21	3
3.2 Configuring the drive 22	3
3.3 Serial ATA cables and connectors 22	3
3.4 Drive mounting 23	3
3.5 Drive integration 24	3
3.5.1 Drive installation 25	3
3.5.2 Consumer usage 25	3
3.6 Security Erase--ATA security commands 25	3
3.6.1 Secure Erase procedure 25	3
3.6.2 Drive State after Secure Erase 25	3
4.0 Serial ATA interface 27	4
4.1 Hot-Plug compatibility 27	4
4.2 Serial ATA device plug connector pin definitions 27	4
4.2.1 ATA Security policy exceptions 29	4
4.2.2 DriveTrust Mode support 30	4
4.2.3 Full Disc Encryption support 31	4
4.2.4 Supported ATA commands 32	4
4.2.5 Identify Device command 36	4
4.2.6 Set Features command 39	4
4.2.7 S.M.A.R.T. commands 41	4
5.0 Compatibility summary 43	4
5.1 Installation considerations 43	4
5.2 System Compatibility using WIndows XP SP2 43	4
5.2.1 BIOS versions tested in ATA Security mode 43	4
5.2.2 DriveTrust compatibility verification 46	4
5.3 Operating system versions tested 49	4
5.4 Compatibility test configurations 50	4
6.0 Seagate Technology support services 51	4
Figure 1. Typical +5V only startup and operation current profile 11	5
Figure 2. Serial ATA connectors 22	5
Figure 3. Attaching SATA cabling 22	5
Figure 4. Mounting dimensions 23	5
Figure 5. Momentus 7200 FDE.1 SATA drive label example 24	5
1.0 Introduction	7
1.1 System requirements	7
1.2 About Momentus 7200 FDE.1 SATA disc drives	8
1.2.1 Drive state upon shipment	9
2.0 Drive specifications	11
2.1 Specification summary table	11
2.2 Formatted capacity	13
2.2.1 LBA mode	13
2.3 Default logical geometry	13
2.4 Physical organization	14
2.5 Recording and interface technology	14
2.6 Physical characteristics	14
2.7 Seek time	15
2.8 Start/stop times	15
2.9 Power specifications	16
2.9.1 Power consumption	16
2.9.1.1 Typical current profile	17
2.9.2 Conducted noise	17
2.9.3 Voltage tolerance	17
2.9.4 Power-management modes	18
2.10 Environmental specifications	19
2.10.1 Ambient temperature	19
2.10.2 Temperature gradient	19
2.10.3 Humidity	19
2.10.3.1 Relative humidity	19
2.10.3.2 Wet bulb temperature	19
2.10.4 Altitude	19
2.10.5 Shock	20
2.10.5.1 Operating shock	20
2.10.5.2 Nonoperating shock	20
2.10.6 Vibration	20
2.10.6.1 Operating vibration	20
2.10.6.2 Nonoperating vibration	20
2.11 Acoustics	21
2.12 Electromagnetic immunity	21
2.13 Reliability	23
2.13.1 Free Fall Protection feature	23
2.14 Agency certification	23
2.14.1 Safety certification	23
2.14.2 Electromagnetic compatibility	24
2.14.3 FCC verification	24
2.15 Environmental protection	26
2.15.1 European Union Restriction of Hazardous Substances (RoHS)	26
2.15.2 China Restriction of Hazardous Substances (RoHS) Directive	26
2.16 Corrosive environment	26
3.0 Configuring and mounting the drive	27
3.1 Handling and static-discharge precautions	27
3.2 Configuring the drive	28
3.3 Serial ATA cables and connectors	28
3.4 Drive mounting	29
3.5 Drive integration	30
3.5.1 Drive installation	31
3.5.2 Consumer usage	31
3.6 Security Erase--ATA security commands	31
3.6.1 Secure Erase procedure	31
3.6.2 Drive State after Secure Erase	31
4.0 Serial ATA interface	33
4.1 Hot-Plug compatibility	33
4.2 Serial ATA device plug connector pin definitions	33
4.2.1 ATA Security policy exceptions	35
4.2.2 DriveTrust Mode support	36
4.2.3 Full Disc Encryption support	37
4.2.4 Supported ATA commands	38
4.2.5 Identify Device command	42
4.2.6 Set Features command	45
4.2.7 S.M.A.R.T. commands	47
5.0 Compatibility summary	49
5.1 Installation considerations	49
5.2 System Compatibility using WIndows XP SP2	49
5.2.1 BIOS versions tested in ATA Security mode	49
5.2.2 DriveTrust compatibility verification	52
5.3 Operating system versions tested	55
5.4 Compatibility test configurations	56
6.0 Seagate Technology support services	57
A	59
B	59
C	59
D	59
E	59
F	59
G	59
H	59
I	60
K	60
L	60
M	60
N	60
O	60
P	60
Q	60
R	60
S	60
T	61
U	61
V	61

Seagate ST9750420AS Momentus 7200 FDE.1 SATA Product Manual - Page 24

Electromagnetic compatibility, Korean RRL, Australian C-Tick N176, FCC verification, Radio

Page 24 highlights