Seagate ST9750420AS Momentus 7200 FDE.1 SATA Product Manual - Page 33
Serial ATA interface - ata device
View all Seagate ST9750420AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4.0 Serial ATA interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0-4; multiword DMA modes 0-2, and Ultra DMA modes 0-6. The drive also supports the use of the IORDY signal to provide reliable high-speed data transfers. For detailed information about the Serial ATA interface, refer to the "Serial ATA: High Speed Serialized AT Attachment" specification. 4.1 Hot-Plug compatibility Momentus 7200 FDE.1 SATA drives incorporate connectors which enable you to hot plug these drives in accordance with the Serial ATA: High Speed Serialized AT Attachment specification revision 2.0. This specification can be downloaded from http://www.serialata.org. This device requires a COMRESET from the host after a hotplug event. 4.2 Serial ATA device plug connector pin definitions Table 5 summarizes the signals on the Serial ATA interface and power connectors.. Momentus 7200 FDE.1 SATA Product Manual, Rev. B 27