Seagate STD224000N Installation Manual - Page 19

Front panel of external DAT drive

Get Seagate STD224000N - DAT Scorpion 24 Tape Drive PDF manuals and user guides
UPC - 662676603727
View all Seagate STD224000N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Seagate DAT Drive Installation Manual 15 Figure 10 Front panel of external DAT drive Cartridge Status (green) Drive Status (yellow) Cassette Insertion Slot Power (green) Eject Button Drive status LED The Drive Status LED is yellow and indicates the following conditions: • If the Drive Status light is ON continuously, the drive is reading or writing the tape (that is, SCSI or DAT activity is present). If you push the eject button while the Drive Status LED is ON, you may lose data. ® Note. During a SCSI PREVENT MEDIA REMOVAL command, the Drive Status LED is always ON. • If the drive status light is flashing rapidly, a hardware fault has occurred. If this occurs immediately after power-on and you have enabled the power-on self-test (through a jumper setting), the power-on self-test may have failed and the drive will not operate.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Seagate DAT Drive Installation Manual
15
Figure 10
Front panel of external DAT drive
Drive Status
(yellow)
Eject Button
Power
(green)
Cartridge
Status
(green)
Drive status LED
The Drive Status LED is yellow and indicates the
following conditions:
•
If the Drive Status light is ON continuously, the
drive is reading or writing the tape (that is, SCSI or
DAT activity is present). If you push the eject button
while the Drive Status LED is ON, you may lose
data.
Note.
During a SCSI PREVENT MEDIA REMOVAL
command, the Drive Status LED is always ON.
•
If the drive status light is flashing rapidly, a
hardware fault has occurred. If this occurs
immediately after power-on and you have enabled the
power-on self-test (through a jumper setting), the
power-on self-test may have failed and the drive will
not operate.