Seagate STM303004N1AAAS-RK DiamondMax 21 SATA Product Manual - Page 27
Typical current profiles, Conducted noise, Note., Voltage tolerance
![]() |
UPC - 751921029914
View all Seagate STM303004N1AAAS-RK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2.8.1.1 Typical current profiles Figure 1. Typical 5V startup and operation current profile Figure 2. Typical 12V startup and operation current profile 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. • Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. 2.8.3 Voltage tolerance Voltage tolerance (including noise): 5V ± 5% 12V ± 10% DiamondMax 21 Serial ATA Product Manual, Rev. C 21
![](/manual_guide/products/seagate-stm3320820as-diamondmax-21-sata-product-manual-2216d69/27.png)