Sennheiser AC 3200 Instructions for Use - Page 60
Putting the AC 3200 into operation, Preparing the AC 3200 for use
View all Sennheiser AC 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Putting the AC 3200 into operation Putting the AC 3200 into operation Preparing the AC 3200 for use You can set up the AC 3200 on an even surface or mount it into a 19" rack. Setting up the device CAUTION! Danger of heat damage to the devices! During operation, the AC 3200 and the connected transmitters produce considerable waste heat! If this heat cannot dissipate, it can cause damage to the devices! The devices are equipped with fans to assist dissipation of generated heat: ̈ Make sure that the air vents · on the sides of the AC 3200 are not covered or blocked and provide ducts of sufficient size or allow sufficient space to ensure a free air flow between the devices. ̈ Regularily clean the air vents on the sides of the AC 3200 with a soft brush. ̈ In order to avoid heat accumulation, make sure to install the AC 3200 as the uppermost device. ̈ Never stack more than two devices directly one above the other! To ensure that the AC 3200 cannot slip on the surface on which it is placed, four self-adhesive soft rubber feet are supplied. CAUTION! Risk of staining of surfaces! Some surfaces have been treated with varnish, polish or synthetics which might cause stains when they come into contact with other synthetics. Despite a thorough testing of the synthetics used by us, we cannot rule out the possibility of staining. ̈ Do not place the AC 3200 on delicate surfaces. 8