Sennheiser AC 3200 Instructions for Use - Page 64

Recommendations and tips for optimum reception, Cleaning the AC 3200

Get Sennheiser AC 3200 PDF manuals and user guides View all Sennheiser AC 3200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Recommendations and tips for optimum reception Recommendations and tips for optimum reception y There should be a "free line of sight" between transmitting and receiving antennas. y To avoid overloading the receiver, observe a minimum distance of 5 m between transmitting and receiving antennas. y Observe a minimum distance of 50 cm between the transmitting antenna and metal objects (such as cross members or reinforced-concrete walls). y When using a multi-channel system: Set all transmitters of your multi-channel system to intermodulation-free frequencies. Cleaning the AC 3200 CAUTION! Liquids can damage the electronics of the device! Liquids entering the housing of the device can cause a short-circuit and damage the electronics. ̈ Keep all liquids away from the device. ̈ Do not use any solvents or cleansing agents. ̈ Before cleaning, disconnect the device from the mains. ̈ Only use a slightly damp cloth to clean the device. ̈ Regularily check the air vents for dust deposits. If necessary, remove the dust with a soft brush. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
12
Recommendations and tips for optimum reception
Recommendations and tips
for optimum reception
There should be a “free line of sight” between transmitting and receiving antennas.
To avoid overloading the receiver, observe a minimum distance of 5 m between
transmitting and receiving antennas.
Observe a minimum distance of 50 cm between the transmitting antenna and metal
objects (such as cross members or reinforced-concrete walls).
When using a multi-channel system:
Set all transmitters of your multi-channel system to intermodulation-free
frequencies.
Cleaning the AC 3200
±
Before cleaning, disconnect the device from the mains.
±
Only use a slightly damp cloth to clean the device.
±
Regularily check the air vents for dust deposits. If necessary, remove the dust with
a soft brush.
Liquids can damage the electronics of the device!
Liquids entering the housing of the device can cause a short-circuit
and damage the electronics.
±
Keep all liquids away from the device.
±
Do not use any solvents or cleansing agents.
CAUTION!