Sennheiser RS 170 Instructions for use - Page 15

Putting the RS 170 into operation B Connecting the transmitter to RCA sockets (output) WARNING Danger of hearing damage due to high volumes! You can suffer hearing damage if you are using other Kleer compatible headphones without integrated volume control, such as the Sennheiser MX W1, with the TR 170 transmitter: ̈ In this case, do not connect the transmitter to the RCA sockets (output) of your sound source, but to the headphone socket of your sound source. ̈ Before putting the headphones on, set the volume on the sound source to a low level. Depending on your sound source, you have to change the setting of the ATTENUATOR switch ቨ in order to optimally adjust the signal of the sound source. Portable sound source Stationary sound source (MP3 player, mobile telephone) (hi-fi system, amplifier) Music Photos ̈ Set the ATTENUATOR switch ቨ ̈ Set the ATTENUATOR switch ቨ Videos Extras Settings Shuffle Songs to "0 dB". to "-8 dB". ̈ Plug the adapter for RCA sockets ቮ onto the audio cable ቫ. ̈ Connect the red connector of the adapter ቮ to the red socket R of your sound source. ̈ Connect the white connector of the adapter ቮ to the white or black socket L of your sound source. B 0 7 If your sound source has several RCA sockets, use the RCA outputs (usually "Audio Out"). 14