Sharp 20LK32 Operation Manual - Page 24

Using the Video and Audio Input Jacks L Connecting video equipment for playback of video material. • When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen on the television screen. Connecting video device equipped with video output terminals. CONNECTIONS VIDEO EQUIPMENT To VIDEO OUTPUT (Front connection terminals of TV) To AUDIO OUTPUT 20LK32 CAMCORDER TV GAME To VIDEO OUTPUT To AUDIO OUTPUT (L) To AUDIO OUTPUT (R) To AUDIO OUTPUT To VIDEO OUTPUT 20LK62 (Rear connection terminals of TV) VCR REV FWD DVD To AUDIO OUTPUT (R) To AUDIO OUTPUT (L) To VIDEO OUTPUT 20LK32 20LK62 L To watch video material playback. • Press the Remote's INPUT button to select the VIDEO INPUT mode for the video equipment you wish to play. • The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed. AIR or CABLE INPUT (Rear/Front) AIR or CABLE INPUT 1 (IN) Rear INPUT 2 (IN 2) Front 20LK32 20LK62 • INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to the lowest channel. • The front terminal overrides the rear terminal. (20LK32 only) Note: • When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the television or the equipment being connected. • Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. Please refer to relevant laws in your country. • For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used. • The connection cords can be obtained from your local video store. 24 24-26 20LK32/62 [E].p65e 24 11/6/01, 9:01 AM