Sharp 25NS100 25NS100|25NS180|27NS100|27NS180 Operation Manual - Page 20
] ACTIVATE ON TO TURN ON V-CHIP BLOCK, To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has
![]() |
View all Sharp 25NS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Parent Control (V-CHIP Operation Continued) [3] ACTIVATE ON TO TURN ON V-CHIP BLOCK 1 Press CH UP (8) or DOWN (9) to move the " " mark to "STATUS", then press VOL (+) or (-) to activate the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.) → 2 Press MENU, then "INPUT SECRET No." will be displayed. 3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD. 4 Press MENU and SECRET No. is registered. L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated. 1 "V-CHIP HAS BEEN ACTIVATED" will be displayed if you watch the program with Program Rating data the same as you configured. NOTE: • "V-CHIP HAS BEEN ACTIVATED" will not be displayed if STATUS is not configured to "ON". 2 Press MENU, then "INPUT SECRET No." will be displayed. 3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then V-CHIP BLOCK will temporarily be canceled. If the wrong SECRET No. is chosen, "SECRET No. IS INCORRECT" will be displayed. Input the SECRET No. again in this case. NOTE: • If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again. 20 19-25 25&27NS100/180 1.4 20 6/1/00, 2:09 PM
![](/manual_guide/products/sharp-25ns100-25ns10025ns18027ns10027ns180-operation-manual-8252ae3/20.png)